JVC XV-N5SL, Инструкция по эксплуатации

Страница: 63 / 204

Additional information
Additional
information
59
XV-N5SL/LET0204-015A/English
English
AV COMPU LINK remote control system
The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest
operation.If your video/audio player (such as a DVD player, CD player and VCR) and
television or/and amplifier/receiver support the JVC AV COMPU LINK system and are tied
with the JVC AV COMPU LINK cable(s), simply starting the player will automatically make
all necessary settings on the television and/or amplifier/receiver to allow you to enjoy the
playback.
Using an AV COMPU LINK cable, connect the AV COMPU
LINK terminals of each component to one another.
• The unit’s AV COMPU LINK setting is controlled using
the OTHERS menu in the preference display. See page
53 for operation.
• For information on the connection between a TV and a
receiver, refer to the receiver’s instructions.
• If you connect the unit to a television via AV COMPU
LINK, set the unit’s AV COMPU LINK setting as follows.
• When connecting to the VIDEO-1 input terminal
of the television: DVD2
• When connecting to the VIDEO-2 input terminal
of the television: DVD3
• If you connect the unit to a television and VCR via AV
COMPU LINK, set the VCR’s Remote Control Code and
the unit’s AV COMPU LINK setting as follows.
• When connecting to the VIDEO-1 input terminal
of the television:
The unit’s AV COMPU LINK setting: DVD2
VCR’s Remote Control Code: B
• When connecting to the VIDEO-2 input terminal
of the television:
The unit’s AV COMPU LINK setting: DVD3
VCR’s Remote Control Code: A
• If you connect the unit to a television and receiver via
AV COMPU LINK, set the unit’s AV COMPU LINK
setting to DVD1.
The JVC COMPU LINK system allows you to enjoy video
and/or audio by simply pressing Play on the source
component (the component which plays back the video
or audio, such as a DVD player or VCR). You don’t even
have to switch on power on the TV or receiver.
1
Turn on the main power of the television.
2
Insert a disc (or tape) into the source
component.
3
Press
3
of the source component.
The following actions are performed automatically:
• Turning on television power.
• Setting the source of the television to the external
input (VIDEO-1 or VIDEO-2).
• Turning on receiver power.
• Setting the source of the receiver to the component
which has started playback.
Connection and setup
TV
The unit
To AV COMPU LINK (II, EX or III)
To AV COMPU LINK
VCR
The unit
To AV COMPU LINK
(II, EX or III)
TV
IMPORTANT!
• When you make video connection between the unit and
another device (such as a receiver and TV) via the
composite, S-video or component jacks, as well as AV
COMPU LINK connection, see also the instruction
manual of the other device.
Notes for connection
• If you connect the unit to a receiver via AV COMPU LINK
in a system including a Dolby Digital decoder, some
functions may not be performed automatically.
• Connect the AUDIO OUT jacks of the unit to the audio
input jacks of a receiver that indicating "DVD."
Otherwise, the system will not work correctly.
• There may be no description about connections to the
unit in the instruction manual of a television or VCR.
However a television or VCR with AV COMPU LINK
terminals indicating "II," "EX" or "III" can be connected
to the unit.
Operation
Receiver
The unit
TV
To AV COMPU LINK
(II, EX or III)
To AV COMPU LINK
LET0204-015A.book Page 59 Friday, June 21, 2002 6:19 PM