background image

3

I

Due to design modification, data given in this instruction 
book are subject to possible change without prior notice.

The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to 
the presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric 
shock to persons.

The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.

For USA and CANADA

INFORMATION FOR USA

INFORMATION

This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from 
that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for 
help.

CAUTION

CHANGES OR MODIFICATIONS NOT APPROVED BY JVC 
COULD VOID USER'S AUTHORITY TO OPERATE THE 
EQUIPMENT.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) 
THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) 
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, 
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED 
OPERATION.

INFORMATION (FOR CANADA) RENSEIGNEMENT 
(POUR LE CANADA)

This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme 
NMB-003 du Canada.

WB-1540_1550.book  Page 3  Thursday, May 17, 2007  3:21 PM

Содержание WB-1540U

















Отзывы: