manualshive.com logo in svg

JVC VR-716E, Инструкция по эксплуатации, Страница: 98 / 118

Поделиться
Скачать
JVC VR-716E Скачать руководство пользователя страница 98

98

Connecting to a PC – Useful Browser Features – (continued)

䡵

The notification mail received during alarm/sensor input will look as follows:

Mail Header

• The content in the [Subject] will be reflected.

• VR-716’s host name will be reflected as the Host Name. The content

registered at [Location Name] is also reflected in [ ].

• Lists data of alarm/sensor that are triggered within the specified

minimum notification interval. The list contains 3 types of information
as shown below:
• Alarm/Sensor Activation Time
• Recording Mode

A: Alarm recording
S: Sensor recording

• Camera Channel [Camera Title]

Message (Normal List Format)

• Only the language of the mail message changes in

accordance with the “LANGUAGE SELECTION” in the
main menu. (

☞

 page 25)

Note

From: [email protected]

To: [email protected]

Subject: Starting Alarm/Sensor REC!!

• ALARM/SENSOR NOTIFICATION

Host name:

 VR-716 [3rd factory]

The following alarm/sensor recording has been started:

-----------------------

01/08/2003(FRI) 20:15:15 A 3ch [INF.], 4ch [ENTRANCE]

01/08/2003(FRI) 20:15:17 S 9ch [  ]

01/08/2003(FRI) 20:18:15 A 13ch [N. GATE], 14ch [  ], 16ch [  ]

-----------------------

The End

RECORD NOTIF.
----------------
HOST. vr716
[3rd factory]
----------------
LIST DISPLAY
14/10/2003
----------------
clock: 19:39:18
Mode: A
CamCh: 3[INF.], 4[ENTRANCE]
----------------
clock: 19:39:39
Mode: S
CamCh: 6[  ]
----------------
clock: 19:39:45
Mode: A
CamCh: 13[N. GATE], 14[  ], 16[  ]
----------------

Message (Short List Format)

• There will be a few seconds difference between the

alarm notification list and the actual time when record-
ing starts.

• Refer to the notes related to Summer Time.

(

☞

 Page 116)

Caution

Содержание VR-716E























































































































Отзывы:

Нет отзывов