68
10.1.4 Change the Record & Timer Properties Via the Network
Follow the instructions below to reconfigure the record and schedule recording settings via the
network.
A.
Set the regular record settings
1. When in the single –device mode, click to enter the
SETUP
page. (See the sample
screen as in
A
above)
2. Select a desired recording
RATE
and
QUALITY
from the corresponding drop-down list
3. Click the
OK
tag to proceed.
Set the Alarm record settings
1. When in the single –device mode, click to enter the
SETUP
page. (See the sample
screen as in
A
above)
2. Set the
ALARM SETTING
to
ON
to enable the drop-down list in the
ALARM SETTING
area.
3. Select a desired recording
RATE
and
QUALITY
from the corresponding drop-down list.
4. Click the
OK
tag to proceed.
Set the record timer
1. When in the single –device mode, click to enter the
SETUP
page. (See the sample
screen as in
A
above)
2. Set the
RECORD TIMER
to
ON
to enable the
RECORD TIMER
setting area. The
MODIFY
button will appear.
3. Click the
MODIFY
button to set the schedule for recording for each day. (See the sample
screen below) Go to both the
START TIME
&
END TIME
boxes, enter a specific
Hour:
Minute
and click
OK
to return to the
SETUP
page.
4.When all required settings are completed, click
OK
to proceed.
