JVC VR-509E страница 40 Скачать руководство пользователя

Страница: 40 / 128

Playing Back Recorded Images

Plays back recorded images. This is activated by running a

search according to the date of the image to be played back

using [SEARCH DATE] (See page 43) or in accordance with

the time when alarm signals are received using the [ALARM

LIST SEARCH] feature. (See page 42)

1. Press the [PLAY/PAUSE] button.

• The [EVENT SEARCH] screen will be displayed.

2. Select [CONTINUOUS PLAYBACK] with [

], and

then press the [SET] button.

• Playback will be started.

The OLDEST EVENT/LATEST EVENT will be displayed

when the [SKIP] button is pressed while the [EVENT

SEARCH] screen is being displayed.

3. Press the [PLAY/PAUSE] button.

• Playback will be paused.

• Press the [PLAY/PAUSE] button again to resume

playback.

4. Press the [PLAY STOP] button.

• The screen will return to the [EVENT SEARCH] screen.

5. Press the [PLAY STOP] button once again.

• The [EVENT SEARCH] screen will close.

It is possible to view recorded images when in the Recording

mode.

This will not affect the images being recorded.

1. Press the [PLAY/PAUSE] button during recording.

• Images can be played back with the normal operations

even when recording is in progress.

The following modes of playback are possible when in the

Simultaneous Playback mode:

• Normal playback

• Search Alarm (Page 42 “Searching with the Alarm List”)

• Search Date (Page 43 “Searching for Images According

to Date/Time”)

• Jog/Shuttle Playback (Page 43 “Adjusting Playback

Speed”)

• Skip Playback (Page 44 “Skipping Recorded Images”)

Playing Back Images

Pausing during Playback

Ending Playback

EVENT SEARCH

CONTINUOUS PLAYBACK
ALARM LIST SEARCH ..
SEARCH DATE
* * / * * / 2 0 * * * * : * *
SKIP SET ..

Play with PLAY / PAUSE button.

SKIP

OLDEST EVENT

LATEST EVENT

Playing Back during Recording
(Simultaneous Playback Mode)

•

There are cases where playback images are displayed

after a delay when playback is activated at the same

time as recording, but this has no adverse effects on

the recording.

•

In order to ensure that the hard disk is kept in its

optimal status, the VR-509 will periodically enter the

maintenance mode automatically. When maintenance

is in progress there are cases where the audio sound

may break up or the images be displayed after a delay

during playback. In this case, wait until the mode

display (“DB/”) has disappeared before restarting

playback. (Page 25)

•

There are cases where images that have been

recorded close to the most recent recording time

cannot be played back normally if recorded images are

viewed during recording. In this case, stop the

playback for a few moments, and then start it again.

•

There are cases where images recorded close to the

times of power failures will not playback normally.

•

The VR-509 uses a special recording method that may

result in a loss of synchronization between the images

and the audio sound, depending on the setup

conditions.

CAUTION

Playing Back Recorded Images

Содержание VR-509E

































































































































Результаты поиска

Содержание VR-509E

Отзывы:

Похожие инструкции для VR-509E

Бренды по названию

Популярные бренды

JVC VR-509E, Инструкция по эксплуатации

Результаты поиска

Содержание VR-509E

Отзывы:

Похожие инструкции для VR-509E

Бренды по названию

Популярные бренды