JVC VN-V686U, Инструкция по эксплуатации

Страница: 69 / 121

69
Protocol Page
This page is for changing the HTTP server port number, VSIP server status, and VSIP server port number.
This page can be used during access using
A
admin
B
.
●
Press the [OK] button to enable the new settings.
●
After changing, you will need to re-establish the connection if you are using the Internet Explorer.
Memo
:
●
If Built-in Viewer is used for playback, change the [HTTP Port] number in the setting screen of Built-in
Viewer to the same value. (
A
Page 97)(
A
Page 102)
A
B
C
A
HTTP Server
Port You can change the port number for Built-in web server of VN-V686U. (1-65535)
The default port number setting is
A
80
B
. The port number of JPEG/MPEG4
server is changed also.
During access to VN-V686U from the Internet Explorer, enter the following in the
Internet Explorer when the camera is in its default settings.
http://192.168.0.2
If the port number is changed to
A
8080
B
, for example, enter the Internet Explorer
as follows.
http://192.168.0.2:8080
B
VSIP Protocol You can change the On/Off setting of VSIP Protocol. To use this unit from Nextiva
of Verint Systems Inc., select
A
On
B
.
C
VSIP Server Port You can change the port number for Built-in VSIP server of VN-V686. (1-65535)
The default port number setting is
A
5510
B
.