JVC VN-V686U, Инструкция по эксплуатации

Страница: 97 / 121

97
A
On Screen Display
Settings For setting display items on the viewer screen.
For the JPEG Viewer, characters are displayed as overlay on the video
image.
Camera ID Select
A
On
B
to display [Camera ID]. (Up to 16 alphanumeric characters will
be displayed. )
[Camera ID] can be specified on the Camera page of VN-V686U. (
A
Page 38)
PositionTitle Select
A
On
B
to display the title of the position that is being displayed.
Motion Detection Selecting
A
On
B
displays the area in which motion is detected in red.
Tracking Frame Select
A
On
B
to display blue frame around the tracking target of
Intelligent Tracking on the screen. (
A
Page 111)
Tracking Status Select
A
On
B
to display the Intelligent Tracking status as
A
Standby
B
,
A
Locked
B
or
A
Losing
B
on the screen. (
A
Page 111)
Time Select
A
On
B
to display the time.
This indicates the time that is stored in the JPEG data.
Format Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH, MM,
and SS denote hour, minute and second respectively. mm is equivalent to 1/
100 seconds.
B
Stream Settings For specifying settings for receiving JPEG stream.
Stream For selecting the protocol when the viewer acquires data from VN-V686U.
When
A
HTTP
B
is selected, lost packets are recovered via resending. VN-
V686U may be monitored using multiple viewers when
A
Multicast
B
is
selected.
Memo
:
●
When playing back via multicast, start multicast sending on the
Streaming page of the VN-V686U unit.
[Streaming Page] (
A
Page 70)
Note:
●
When Built-in Viewer is launched with
A
Multicast
B
specified, a Windows
firewall warning may appear. In this case, select
A
unblock
B
and proceed.
●
If
A
block
B
is selected, the Windows firewall will block the multicast stream
and playback of multicast by the viewer will fail.
HTTP Port You can change the HTTP port number.
The default port number setting is
A
80
B
.
Specify the same value as the parameter that is set on the Protocol page of
VN-V686U. (
A
Page 69)
Frame Rate For selecting the acquisition frame rate of the viewer.
Selecting a large frame rate will increase the processing load of the
computer on which the viewer is running.
Note:
●
Set to a rate such that the CPU burden of the computer does not exceed
80 %. When the CPU is overloaded, the computer may not function
properly.