JVC VN-V686U, Инструкция по эксплуатации

Страница: 115 / 121

115
Auto Trace Setting
This item stores and reproduces manual operation.
Click the [Auto Trace] tab on the [PTZ Controller] screen and configure settings at the [Auto Trace] setting
screen.
Note:
●
As Auto Trace performs simple saving of manual operation, the position may be shifted during playback.
● A
Digital Flip
B
cannot be used during Auto Trace recording. [Auto Flip] (
A
Page 59)
A
B
C
Click the [Auto Trace] tab to display the [Auto Trace]
screen.
Click [Record Start].
The camera will start recording of Pan/Tilt and
Zoom operations. (for approximately 30 seconds)
Memo
:
●
For details on the manual operation, see
[Operation] (
A
Page 106).
When manual operations are completed, click
[Record Stop].
[State] Display
The current status is displayed.
Standby :The camera is on standby. [Record
Stop] is invalid.
Recording :The camera is recording. Click
[Record Stop] to finish recording.
A
Completed
B
will be displayed.
Completed :Recording is completed. After
A
Completed
B
is displayed for 3
seconds,
A
Standby
B
will be
displayed.
Timeout :30 seconds has passed since
recording started. (Operation for
the 30 seconds has been recorded.)
After
A
Timeout
B
is displayed for 3
seconds,
A
Standby
B
will be
displayed.
Memory Full : The operation has exceeded the
number of recordable operations.
Further recording cannot be
made even if it is within 30
seconds. (Operations before the
limit are recorded.) After
A
Memory Full
B
is displayed for 3
seconds,
A
Standby
B
will be
displayed.