JVC VN-V686U, Инструкция по эксплуатации

Страница: 59 / 121

59
F
Auto Flip Set this item when shooting objects that pass right under the camera.
Otherwise, following operations are necessary to shoot objects that pass right
under the camera.
A
Turn the camera to face down
B
Rotate the camera 180
⬚
horizontally
C
Turn the camera to face up
You can use the [Auto Flip] function to perform the above operations
automatically.
Off : Auto Flip function does not activate.
Digital Flip
: The top/bottom and left/right of the image flips when tilt position
passed the angle of 135 degrees.
Mode1: When the camera faces bottom, it rotates 180
⬚
horizontally and
stops. In this case, the operating direction of the camera is the same
as that of the Pan/Tilt operation.
Mode2: When the camera faces bottom, it rotates 180
⬚
horizontally and the
operating direction of the camera is opposite that of the Tilt
operation. Select this mode if you wish to operate continuously.
Once operation stops, the direction will return to normal.
Mode3: When the camera faces bottom, it rotates 180
⬚
horizontally and the
operating direction of the camera is opposite that of the Tilt
operation. However, the operating direction will return to normal 10
seconds after the operation has stopped.
[Setting values:Off, Digital Flip, Mode1, Mode2, Mode3]
Memo
:
●
[Intelligent Tracking] is disabled when
A
Digital Flip
B
is selected. (
A
Page 55)
●
Settings for [Preset Position Speed] are reflected in the rotation speed when
images are flipped using
A
Mode1
B
,
A
Mode2
B
,
A
Mode3
B
. To flip images in high
speed using
A
Mode1
B
,
A
Mode2
B
,
A
Mode3
B
, set the [Speed] in [Preset
Position Speed] to
A
4
B
.
Note:
●
When [Auto Flip] is set to other than
A
Off
B
, the camera can be moved to areas
outside the pan limit with the Tilt operation. When
A
Digital Flip
B
is set, use the
Tilt operation to flip and return to the pan limit area again. When
A
Mode1
B
,
A
Mode2
B
or
A
Mode3
B
is set and the camera is moved to inside of
the pan limit with Pan operation.