Connection via Wireless LAN
Router without WPS Function
(SSID Connection)
1
Press the [
A
] button.
2
Press the [NETWORK] button on the remote
control.
3
Press the [Wi-Fi SET UP] button on the
remote control.
4
Press the [
K
/
J
] button to select “Wi-Fi
Setup”, and then press the [ENTER] button.
5
Press the [
K
/
J
] button to select “SSID Set”
, and then press the [ENTER] button.
0
Wait until the display shows “SSID Ready”
which takes about 40 seconds.
6
On iPod touch/iPhone/iPad, select “Wi-Fi”
from “Settings”, and then set to ON.
0
On the Android device, select “Wireless &
networks” in “Settings”, and then select “Wi-Fi
settings”.
0
On PC, open the screen for the wireless LAN
network setup.
0
If Wi-Fi function is Off, set it to On.
0
Refer to the instruction manual of your device
for further detail.
7
Select “UX-N5_xxxxxx” from the list of
network.
0
“xxxxxx” is a model-specific number.
8
On iPod touch/iPhone/iPad, start a web
browser (Safari).
0
Perform the same operation for the Android
device/PC.
9
Type 192.168.1.1 at the address bar, and
press the [GO] button.
The UX-N5 configuration page is displayed.
.
UX-N5
Network Configuration
192.168.1.1
10
Select Network Configuration (Network
Configuration) tab.
11
From the Service Set ID(SSID) pull down list,
select SSID of your router.
.
UX-N5
12
Enter your network password if required.
0
Depending on a router, it may be necessary to
put a check mark on DHCP in the Advance
Setting menu.
13
Tap or click “Apply” at the bottom of the
page to apply your settings.
.
7:0
7:0
14
Tap or click “OK” to confirm your settings.
0
“Successfully connected to [network name]”
N
“Network” will be displayed on the main unit.
15
On iPod touch/iPhone/iPad, select “Wi-Fi”
from “Settings”, and then set to ON.
0
On the Android device, select “Wireless &
networks” in “Settings”, and then select “Wi-Fi
settings”.
0
On PC, open the screen for the wireless LAN
network setup.
16
