JVC TM-A210G, Инструкция по эксплуатации

Страница: 11 / 100

9
DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
You can set the following set-up menu items.
• H. POSITION • CONTROL LOCK • INPUT REMOTE
• WHITE BALANCE • STATUS DISPLAY • ASPECT REMOTE
1. While pressing the MENU button, press the
CHROMA/PHASE button.
The <SET-UP MENU> screen is displayed.
* The screen automatically disappears when no operation
is performed after about 5 minutes.
2. Press the CHROMA/PHASE or CONTRAST/BRIGHT
button to select the desired menu item.
A selection mark (
3
) is put next to the selected item.
3. Press the VOLUME/SELECT buttons to set.
÷
To adjust the white balance, select WHITE BALANCE and
press the VOLUME/SELECT (+) or (–) button to display the
CUT OFF or DRIVE setting screen, then adjust each setting.
÷
Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
Notes:
<Front panel buttons>
1
Selection mark (
3
): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (5 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
∞
Forward the menu item.
5
Reverse the menu item.
– Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
3
Forward the setting value.
2
Reverse the setting value.
EXIT
Exit the <SET-UP MENU>
screen. (release)
DRV Selects DRIVE adjustment.
CUTO
Selects CUT OFF
adjustment.
R·B
Adjusts red and blue
signal level.
RGB
Adjusts red, green and
blue signal level.
Turns the ON-SCREEN
display on or off. (This
DISP function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
Front panel Function
Contents
button displayed
CHROMA/
∞
Forward selection mark (
3
)
PHASE
CONTRAST/
5
Reverse selection mark (
2
)
BRIGHT
Front panel Function
Contents
button displayed
+ Increase (to max. value)
3
Forward the setting value
CUTO Selects CUT OFF setting screen
– Decrease (to min. value)
2
Reverse the setting value
DRV Selects DRIVE setting screen
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
÷
Parameter for H. POSITION can be set separately depending on the video input
(Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front
panel.
Select the required video input with the input select buttons on the front panel in
advance.
÷
WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature
value. Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.
Notes:
<SET-UP MENU> screen
PHASE
MENU CHROMA
PHASE BRIGHT
CHROMA CONTRAST
ENGLISH
EN_TM_A210GE_f.p65 03.8.28, 7:03 PM 9