background image

18

TM-1011G

Color Video Monitor

10" measured diagonally

Width:

176.9 mm (6 15/16")

Height:

137.6 mm (5 3/8")

Diagonal:

224.5 mm (8 13/16")

H:

15 kHz

V:

50 Hz/60 Hz

6 MHz (–3 dB)

280 TV lines

Composite signal input/output terminals

VIDEO A/VIDEO B: 2 lines, BNC connector x 4 (1 Vp-p, 75 

)

* The input (IN) and output (OUT) terminals are bridge-connected. (Auto termination)

Analogue audio input/output terminals

AUDIO A/AUDIO B: 2 lines, RCA connector x 4 (0.5 V (rms), high impedance)

* The input (IN) and output (OUT) terminals are bridge-connected.

Remote input terminal

MAKE/TRIGGER: Point-of-contact connection, 1 line, RJ-45 connector (8-pin) x 1

1 W

8 cm (3 

1

/

8

") round x 1,  8 

INPUT A/B:

NTSC (3.58 MHz), PAL (4.43 MHz), B/W (50 Hz/60 Hz)

Operating temperature:

0°C – 40°C (32°F – 104°F)

Operating humidity:

20% – 80% (non-condensing)

AC power: 120 V/220-240 V, 50 Hz/60 Hz
DC power: 12 V

0.9 A (AC 120 V)/0.6 A (AC 220-240 V)
4.3 A (DC 12 V)

Width:

222 mm (8 

3

/

4

")

Height:

229 mm (9 

1

/

8

")

Depth:

338.3 mm (13 

3

/

8

")

7.8 k

g

 (17.2 lbs)

AC power cord

Specifications

Model

Type

Picture Tube

Effective Screen Size

Scanning Frequency

Video Band

Horizontal Resolution

Input/Output Terminals

Audio output

Speaker

Compliant Video Signal

Environmental
Conditions

Power Requirements

Power Consumption

Dimensions

Weight

Accessory

* Illustrations and pictures used in this manual have been exaggerated, abbreviated or compounded for explanatory purposes only.

The appearance of the actual product may differ slightly.

* Dimensions and weight are approximate.
* E. & O.E. Design and specifications subject to change without notice.

En_11-20_TM-1011G.p65

06.2.14, 22:37

18

Содержание TM-1011





















Отзывы: