13
7
BLUE CUTOFF
Adjusts the blue cut-off point.
• MIN
O
MAX (in 155 grades)
7
RED CUTOFF
Adjusts the red cut-off point.
• MIN
O
MAX (in 155 grades)
SIZE/POSI. ADJ.
Adjusts the size and
position of the picture.
7
H. SIZE
Adjusts the horizontal screen size.
• –20
O
00
O
+20 (*)
–:
Reduces the screen size horizontally.
+:
Enlarges the screen size horizontally.
* You can adjust this item with in the range between 00
and +20 during the under-scan mode.
7
H. POSITION
Adjusts the horizontal screen position.
• –20
O
00
O
+20
–:
Moves the screen to the left.
+:
Moves the screen to the right.
7
V. SIZE
Adjusts the vertical screen size.
• –20
O
00
O
+20
–:
Reduces the screen size vertically.
+:
Enlarges the screen size vertically.
7
V. POSITION
Adjusts the vertical screen position.
• –10
O
00
O
+10
–:
Moves the screen down.
+:
Moves the screen up.
DISTORTION ADJ.
Compensates the picture
distortion.
Also compensates the
picture tilt which is caused
by geomagnetic influence.
7
PARALLELOGRAM
Compensates the parallelogram picture distortion.
• –20
O
00
O
+20
–:
Moves the upper side of the picture to the
right, and the lower side to the left.
+:
Moves the upper side of the picture to the
left, and the lower side to the right.
7
TRAPEZOID
Compensates the trapezoid picture distortion.
• –20
O
00
O
+20
–:
Enlarges the upper side of the picture.
+:
Reduces the upper side of the picture.
7
ROTATION
Compensates a picture tilt.
• –31
O
00
O
+31
–:
Turns the picture clockwise.
+:
Turns the picture counterclockwise.
STATUS DISPLAY
Sets the item related to
turning on/off the status
display.
7
STATUS DISPLAY
Sets the status display.
• AUTO/MANUAL/OFF
☞
“About the status display” on page 5
CONTROL LOCK
Prohibits altering the monitor operations except turning
the monitor on/off and deactivating this function.
• ON/OFF
NOTES:
• When “CONTROL LOCK” is set to “ON,” “
Control lock
on!” appears on the screen if you try to operate the monitor.
• Operating the monitor by the external control is available if
this function is activated.
all reset
Resets all the settings you have made to factory-preset
values.
• Adjustments made by using the front panel buttons
will also be reset.
1. Move the MENU/VOLUME control to / to
select “all reset,” then move it to
.
Confirmation message is displayed.
2. To initialize, move the MENU/VOLUME control
to
.
• To cancel the initialization, press the MENU/
VOLUME control.
En_11-20_TM-1011G.p65
06.2.14, 22:37
13
