background image

- 2 -

•  Caution:

-   U s e  o f  c o n t r o l s  o r  a d j u s t m e n t s  o r 

performance of procedures other than 
those described herein, may result in 
hazardous radiation exposure or other 
unsafe operation.

-   To reduce the risk of fire or electric shock, 

do not expose this apparatus to rain or 
moisture. The apparatus must not be 
exposed to dripping or splashing and 
objects filled with liquids, such as vases, 
must not be placed on apparatus.

-   The mains plug/appliance coupler is used 

as the disconnect device, the disconnect 
device must remain readily operable.

-   Danger of explosion if battery is incorrectly 

replaced. Replace only with the same or 
equivalent type.

Warning

•   The battery (batteries or battery pack) shall 

not be exposed to excessive heat such as 
sunshine, fire or the like.

•   Before operating this system, check the 

voltage of this system to see if it is identical 
to the voltage of your local power supply.

•   Do not place this unit close to strong 

magnetic fields.

•   Do not place this unit on the amplifier or 

receiver.

•   Do not place this unit close to damp areas 

as the moisture will affect the life of the 
laser head.

•   If any solid object or liquid falls into the 

system, unplug the system and have it 
checked by qualified personnel before 
operating it any further.

•   Do not attempt to clean the unit with 

chemical solvents as this may damage the 
finish. Use a clean, dry or slightly damp 
cloth.

•   When removing the power plug from the 

wall outlet, always pull directly on the plug, 
never yank on the cord.

•   Changes or modifications to this unit not 

expressly approved by the party responsible 
for compliance will void the user’s authority 
to operate the equipment.

•   The rating label is pasted on the bottom or 

back of the equipment.

•   This equipment complies with FCC radiation 

exposure limits set forth for an uncontrolled 
environment. This equipment should be 
installed and operated with minimum distance 
20cm between the radiator & your body.

DO NOT INGEST BATTERY,CHEMICAL 

BURN HAZARD

 

The remote control supplied with this 
product contains a coin/button cell battery. 
If the coin/button cell battery is swallowed, 
it can cause severe internal burns in just 
2 hours and lead to death. Keep new and 
used batteries away from children. If the 
batter y compar tment does not close 
securely, stop using the product and keep 
it away from children. If you think batteries 
might have been swallowed or placed 
inside any part of the body, seek immediate 
medical attention.

Correct Disposal of this product. This marking 
indicates that this product should not be 
disposed with other household wastes 
throughout the EU. To prevent possible 
harm to the environment or human health 
from uncontrolled waste disposal, recycle it 
responsibly to promote the sustainable reuse of 
material resources. To return your used device, 
please use the return and collection systems 
or contact the retailer where the product was 
purchased. They can take this product for 
environmental safe recycling.

We hereby declares that this product is in 
compliance with the essential requirements 
and other relevant provisions of Directive 
2014/53/EU.

The Bluetooth® word mark and logos are 
registered trademarks owned by Bluetooth 
SIG, Inc. We are the licensee to use such marks. 
Other trademarks and trade names are those of 
their respective owners.

Manufactured under license from Dolby 

Laboratories. Dolby and the double-D symbol 

are trademarks of Dolby Laboratories.

Содержание TH-M337B
















Отзывы: