background image

- 1 -

The lightning flash with arrowhead 
symbol, within an equilateral triangle, 
is intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the product’s enclosure 
that may be of sufficient magnitude as 
to constitute a risk of electric shock to 
persons. 

The exclamation point within an 
equilateral triangle is intended to 
aler t the user to the presence of 
important operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance. 

Safety

Read these instructions

 – All the safety 

and operating instructions should be read 
before this product is operated. 

Keep these instructions

 – The safety and 

operating instructions should be retained 
for future reference. 

Heed all warnings

 – All warnings on the 

appliance and in the operating instructions 
should be adhered to. 

Follow all instructions

 – All operating and 

usage instructions should be followed. 

Do not use this apparatus near water

 – 

The appliance should not be used near water 
or moisture – for example, in a wet basement 
or near a swimming pool and the like.

6  Clean only with a dry cloth.
7  Do not block any ventilation openings. 

Install in accordance with the manufacturer’s 
instructions.

8  Do not install near any heat sources such as 

radiators, heaters, stoves, or other apparatus 

(including amplifiers) that produce heat. 

9.  Do not defeat the safety purpose of the 

polarized or grounding plug. A polarized 
plug has two blades with one wider than 
the other. A grounding plug has two blades 

and a third grounding prong. The wide 
blade or the third prong is provided for 

your safety. If the provided plug does not fit 

into your outlet, consult an electrician for 
replacement of the obsolete outlet.

10 Protect the power cord from being walked 

o n  o r  p i n c h e d  p a r t i c u l a r l y  a t  p l u g s, 
convenience receptacles, and the point 
where they exit from the apparatus.

11  Only use attachments/accessories specified  

by the manufacturer.

12 

Use only with the cart, stand, 

tripod, bracket or table specified 

by the manufacturer, or sold with 
the apparatus. When a cart or 
rack is used, use caution when 

moving the cart/apparatus combination to 
avoid injury from tip-over.

13 Unplug the apparatus during lightning 

storms or when unused for long periods of 
time.

14 Refer all servicing to qualified personnel. 

Servicing is required when the apparatus 
has been damaged in any way, such as 
power supply cord or plug is damaged, 
liquid has been spilled or objects have 
fallen into the apparatus, the unit has been 
exposed to rain or moisture, does not 
operate normally, or has been dropped.

15 

 This equipment is a Class II or double 

insulated electrical appliance. It has been 
designed in such a way that it does not 
require a safety connection to electrical 
earth.

16 The apparatus shall not be exposed to 

dripping or splashing. No objects filled with 
liquids, such as vases, shall be placed on the 
apparatus.

17 Minimum distance around the apparatus 

for sufficient ventilation is 5cm.

18 The ventilation should not be impeded 

by covering the ventilation openings with 
items, such as newspapers,table-cloths, 
curtains, etc…

19 No naked flame sources, such as lighted 

candles, should be placed on the apparatus.

20 Batteries should be recycled or disposed of 

as per state and local guidelines.

21  The use of apparatus in moderate climates.

Important Safety Instructions

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE COVER (OR BACK). 

NO USER-SERVICEABLE PARTS INSIDE. REFER 

SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

Содержание TH-M337B
















Отзывы: