JVC SR-L911US, Инструкция по эксплуатации

Страница: 17 / 56

17
MAIN MENU
PROGRAM TIMER
FUNCTION
ALARM IN
POWER LOSS
HOUR METER
CLOCK ADJUST
PRESS (SHIFT, SET)
PRESS (MENU) TO END
ALARM / SENSOR REC MODE
(ALARM REC)
(SENSOR REC)
(TIMER ALARM)
(DURATION)
(BUZZER)
(TAPE END MODE)
PRESS (SHIFT, SET)
PRESS (MENU) TO END
ON SCREEN MODE
(POSITION) L —UP
PRESS (SHIFT, SET)
PRESS (MENU) TO END
VTR MODE 1
(SHARPNESS) NORMAL
(AUTO REC) OFF
(REC CHECK) NORMAL
(TAPE END MODE) REPEAT
(INDEX SEARCH) OFF
(INDEX AL/SKIP) ALARM
(TAPE END BUZZER) OFF
(WARNING BUZZER) OFF
PRESS (SHIFT, SET)
PRESS (MENU) TO END
VTR MODE 2
(SUMMER TIME) OFF
(TAERMINAL SEL 1) SERIES
(TAERMINAL SEL 2) WARN
(REC REMAIN) OFF
(CAMERA SW) OFF
PRESS (SHIFT, SET)
PRESS (MENU) TO END
●
OFF
OFF
ON
180SEC
OFF
STOP
REC
PLAY
MENU
SHIFT/TRACKING
TIME
MODE
VIDEO CASSETTE RECORDER
HIGH DENSITY
AL/PL
RESET
COUNT/
CLOCK
SKIP/ALARM
SEARCH
TIMER
REC
OPERATE
ON
OPE. LOCK
FWD
SR-L911US
REV
RESET
/CANCEL
REW FF
REVERSE
REC
CHECK
PAUSE/
STILL
STOP/EJECT
SET/V.LOCK
SHUTTLE
FIELD
SHUTTLE
/FIELD
24H
FIELD
ADVANCE
FIELD
ADVANCE
5 SETTING OF THE FUNCTION MENU SWITCHES
You can customize the VCR's functions to suit the requirements of your application using on-screen menu's function switches.
●
Menu function switches are available on four setting screens: ON SCREEN MODE, VTR MODE 1, VTR MODE 2 and
ALARM/SENSOR REC mode. (When the optional SA-K97U RS-232C interface board is installed, the RS-232C
PARAMETER setting screen is also available.)
5-1 Function Menu Switch Setting
Normal screen
[MENU]
button
[MENU]
button
Main menu screen On-screen mode setting
VTR mode 1 setting
VTR mode 2 setting
[MENU] button
Preparation
5 Connect the VCR's video output connector to the
monitor's video input connector.
5
Turn on the VCR and the monitor. Make sure the Stop
mode is engaged.
1
Press the [MENU] button to display the main menu.
2
Press the [SHIFT +] or [SHIFT –] button to select
FUNCTION.
3
Press the [SET +] or [SET –] button.
[ The ON SCREEN MODE setting screen is
displayed.
• Only one menu switch is available in the ON SCREEN
MODE setting screen. This switch (<POSITION>)
allows you to select the screen position of the on-
screen display and to switch it ON/OFF.
4
Press the [SET +] or [SET –] button to enter the selected
position.
5
To display another setting screen, press the [SHIFT +/–]
button.
• Press the [SHIFT +] button to display the VTR mode 1
setting screen.
• Press the [SHIFT –] button to display the alarm/sensor
recording mode setting screen.
[SET –] button
[SET +] button
[SET
+/-]
buttons
• When the optional SA-K97U RS-232C interface
board is installed, the RS-232C PARAMETER
setting screen is also available.
• Select an item with the [SHIFT +/-] buttons.
• Enter the selected values with the [SET +/-] buttons.
Alarm/sensor recording
mode setting
6
The VTR mode 1, VTR mode 2 and alarm/sensor
recording mode setting screens include several menu
switches.
Press the [SHIFT +] or [SHIFT –] button to select the
item you want to set.
• When the cursor arrow reaches the last item (bottom of
the screen) pressing the [SHIFT +] button advances the
display to the next menu switch setting screen.
e.g.: (WARNING BUZZER)
[
(SUMMER TIME)
• When the cursor arrow is at the first item (top of the
screen), pressing the [SHIFT -] button will change the
display to the previous menu switch setting screen.
e.g.: (SHARPNESS)
[
(POSITION)
7
Press the [SET +] or [SET –] button to enter the
selected value.
To set more than one menu switch, repeat steps
6 and 7.
8
End menu switch setting.
Press the [MENU] button twice.
[ The normal screen is restored.
• Set values are stored in the VCR's memory. This
data is retained even when the power is turned off.
[SHIFT +] button
[SHIFT –] button
[MENU] button