JVC SP-THF3F Скачать руководство пользователя страница 60

Страница: 60 / 68

ren

• The system supports DivX 5.x, 4.x and 3.11.
• The system supports DivX files with a resolution

of 720 x 480 pixels or less (30 fps) and 720 x
576 pixels or less (25 fps).

• Audio streams should conform to MPEG1 Audio

Layer-2, MPEG Audio Layer-3 (MP3) or Dolby
Digital.

• The system does not support GMC (Global

Motion Compression).

• Files encoded in the interlaced scanning mode

may not be played back correctly.

• Playing back a DivX file may take a long time.

The elapsed time is not displayed until playback
starts. The elapsed time may also not be dis-
played correctly.

• The stream structure of MPEG1/MPEG2 discs

and files should conform to MPEG system/pro-
gram stream.

• 720 x 576 pixels (25 fps)/720 x 480 pixels (30

fps) is recommended for the highest resolution.

• This system also supports the resolutions of 352

x 576/480 x 576/352 x 288 pixels (25 fps) and
352 x 480/480 x 480/352 x 240 pixels (30 fps).

• The profile and level should be MP@ML (Main

Profile at Main Level)/SP@ML (Simple Profile at
Main Level)/MP@LL (Main Profile at Low Level).

• Audio streams should conform to MPEG1 Audio

Layer-2, MPEG2 Audio Layer-2 or Dolby Digital
(MPEG2 files only).

The Non-DVD side of a “DualDisc” does not com-
ply with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc
on this product is not recommended.

• This system is compatible with USB 2.0 Full-

Speed.

• This system may not play back some USB

devices and some files.

• This system does not support DRM (Digital

Rights Management).

• This system cannot recognize a USB device

whose rating exceeds 5V/500mA.

• When connecting a USB device, refer also to its

manual.

• Connect the USB device directly to the main unit

without routing through a USB hub.

• Disconnect the USB device after stopping play-

back or turning off this system.

• The main unit can charge a USB device when

the USB device is selected as the source.

• Always set the volume to the minimum on this

system when connecting or disconnecting a
USB device.

• JVC bears no responsibility for any loss of data

on the USB device while using this system.

Notes on DivX discs/files

Notes on MPEG1/MPEG2 discs/
files

Caution for DualDisc playback

Notes on files recorded on a
connected USB device

Notes on discs/files (continued)

TH-F3[J_C].book Page 55 Monday, March 17, 2008 11:45 AM

Содержание SP-THF3F





































































Результаты поиска

Содержание SP-THF3F

Отзывы:

Похожие инструкции для SP-THF3F

Бренды по названию

Популярные бренды

JVC SP-THF3F, Инструкция по эксплуатации

Результаты поиска

Содержание SP-THF3F

Отзывы:

Похожие инструкции для SP-THF3F

Бренды по названию

Популярные бренды