14
Operating external components with the remote control
NOTE
• Manufacturers’ codes are subject to change without notice.
• Set the codes again after replacing the batteries of the remote control.
7
To set the manufacturer’s code
You can operate a JVC TV without setting the manufacturer’s code.
1
Slide the remote control mode selector
to TV.
2
Press and hold
TV.
Keep the button pressed until step 4 is finished.
3
Press ENTER.
4
Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a Hitachi TV:
Press
0
, then
7
.
For a Toshiba TV:
Press
2
, then
9
.
5
Release
TV.
If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.
7
Operation
Aim the remote control at the TV.
IMPORTANT
Before using the remote control to operate a TV;
• Set the remote control mode selector to
TV
.
The following buttons are available:
TV
:
Turns TV on and off.
TV VOL +/–
:
Adjusts the volume.
TV/VIDEO
:
Selects the input mode (either TV or
VIDEO).
C/–
:
Changes the channels.
1-10
,
0
,
+10 (100+)
: Selects the channel.
TV RETURN
:
Alternates between the previously selected
channel and the current channel.
The buttons described below are used on pages 14 and
15.
Operating the TV
TV/VIDEO
REC
TV
VCR
VCR
TV
ENTER
TV RETURN
100+
Remote control
mode selector
Number
buttons
(play button)
Manufac-
turer
Code
Manufactur-
er
Code
JVC
01
Nordmende
13, 14, 18, 26 – 28
Akai
02, 05
Okano
09
Blaupunkt
03
Orion
15
Daewoo
10, 31, 32
Panasonic
16, 17
Fenner
04, 31, 32
Philips
10
Fisher
05
Saba
13, 14, 18, 26 – 28
Grundig
06
Sanyo
05
Hitachi
07, 08
Schneider
02, 05
Inno-Hit
09
Sharp
20
Irradio
02, 05
Sony
21 – 25
Magnavox
10
Telefunken
13, 14, 18, 26 – 28
Mitsubishi
11, 33
Thomson
13, 14, 18,
26 – 28, 30
Miver
03
Toshiba
29
Nokia
12, 34
TH-S66-S55[B].book Page 14 Friday, January 14, 2005 10:40 PM