(No.MB358)1-15
3.3
DVD changer mechanism assembly section
Remove the DVD changer mechanism assembly from the main body. (See "Removing the DVD changer mechanism assembly".)
3.3.1 Removing the tray assemblies
(See Figs.1 to 5)
(1) From the top side of the main body, remove the two screws
A
from the top cover and release the two joints
a
on the
both sides of the DVD changer mechanism assembly. (See
Figs.1 and 2.)
(2) Remove the two rods from the top cover and remove the
top cover from the lifter assembly. (See Figs.1 and 2.)
(3) Remove the open det. lever on the left side of the DVD
changer mechanism assembly. (See Fig.3.)
(4) From the right side of the DVD changer mechanism as-
sembly, draw out the tray assemblies toward the front while
pushing the part
b
of the side (R) assembly. (See Figs.4
and 5.)
Note:
The tray can be locked if all tray assemblies are at-
tached.
(5) From the topside of the DVD changer mechanism assem-
bly, move the stopper tabs
c
in the direction of the arrow
and release them. Pull out the tray assemblies from the
DVD changer mechanism assembly. (See Fig. 5.)
Note:
Remove the tray assembly from top tray 5 in order.
Reference:
When reattaching the tray assembly, or when removing the
disc remaining inside, refer to another section "3.3.15 Taking
out the disc in the play mode".
Fig.1
Fig.2
Top cover
Lifter assembly
Rods
A
a
a
A
a
Rods
Top cover
Lifter assembly
a
Содержание SP-PWC3
Страница 16: ...1 16 No MB358 Fig 3 Fig 4 Fig 5 Open det lever b Tray assemblies Side R assembly c Tray assembly ...
Страница 21: ... No MB358 1 21 Fig 14 Fig 15 DVD pickup Rack arm Rack arm spring H Guide shaft c Tray assembly ...
Страница 29: ... No MB358 1 29 Fig 36 Fig 37 Main tray Sub tray Tray stopper Tray stopper ...
Страница 35: ... No MB358 1 35 SECTION 5 TROUBLESHOOTING This service manual does not describe TROUBLESHOOTING ...
