JVC SP-AT7, Инструкция по эксплуатации

Страница: 10 / 84

10
GB
Wall Mounting
• Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe
personal injury and property damage (if you intend to install this product yourself, you must check
for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the
installer’s responsibility to verify that the wall will safely support the total load of the speaker .
• Additional tools (not included) are required for the installation.
• Do not overtighten screws.
• Keep this instruction manual for future reference.
• Use an electronic stud finder to check the wall type before drilling and mounting.
• The operating temperature of this device is -20°C ~ 40°C. The device may be temporarily out of
function if it operates beyond this temperature range.
• Even if your device is resistant to dust and water (IP65), you should avoid leaving it in an extreme
environment. Please bring the device back to indoor when the outdoor temperature is below -20°C.
1. Attach the wall brackets (included) to the main unit with the supplied screws.
Remote Control Operation Range
• The remote control sensor on the front unit is sensitive to the
remote control’s commands up to a maximum of 5 metres away
and within a maximum of a 60° arc.
• Please note that the operating distance may
vary depending on the brightness of the room.
Wall Bracket
Knob
Knob
30° 30°
Max. 5 m
Front View (right speaker)
SP-AT7_IB_20160412.indd 10 12/4/2016 12:16 PM