29
English
Sound control section (Amplifier)
You can always perform the following operations:
SURROUND
:
Turns on or off the Surround modes —
Dolby Pro Logic, Dolby Digital, and DTS
Digital Surround.
SURROUND MODE
:
Selects the DSP modes.
After pressing SOUND, you can perform the following operations:
SUBWOOFER –/+
:
Adjusts the subwoofer output level.
CNTR –/+
:
Adjusts the center speaker output level.
REAR•L –/+
:
Adjusts the left rear speaker output level.
REAR•R –/+
:
Adjusts the right rear speaker output level.
EFFECT
:
Selects the effect level.
TEST
:
Turns on or off the test tone output.
Note:
After adjusting sounds, press the corresponding source selecting
button or CD-DISC to operate your target source by using the 10
keys; otherwise, the 10 keys cannot be used for operating your target
source.
Turntable
After pressing PHONO, you can perform the following operations
on a turntable:
3
:
Starts playing.
7
:
Stops operations.
CD player
After pressing CD, you can perform the following operations on the
CD player:
3
3
3
3
3
:
Starts playing.
4
4
4
4
4
:
Returns to the beginning of the current (or
previous) track.
¢
¢
¢
¢
¢
:
Skips to the beginning of the next track.
7
7
7
7
7
:
Stops playing.
8
8
8
8
8
:
Pauses playing. To release it, press
3
3
3
3
3
.
1 – 10, +10
:
Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Operating JVC’s Audio/Video Components
You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC
components are preset in the remote control.
IMPORTANT:
To operate JVC’s audio components using this remote control:
• You need to connect JVC audio components through the COMPU
LINK-3 (SYNCHRO) jacks (see page 26) in addition to the
connections using cables with RCA pin plugs (see page 5).
• Aim the remote control directly at the remote sensor on the receiver.
• If you use the buttons on the front panel to choose a source, the
remote control will not operate that source. To operate a source with
the remote control, the source must be selected using source
selecting buttons on the remote control.
• To operate the cassette deck or MD recorder using the COMPU
LINK remote control system, set the source name correctly. (See
page 11.)
• Refer also to the manuals supplied with your components.
Tuner
After pressing FM/AM, you can perform the following operations:
FM/AM
:
Alternates between FM and AM.
1 – 10, +10
:
Selects a preset channel number directly.
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.
CATV CH
VCR CH
RM-SRX6500J REMOTE CONTROL
POWER
TV SOUND/ DBS
TV
SURROUND
SURROUND
MODE
CD - DISC
SOUND
VCR
VCR
AUDIO
CATV
CONTROL
CD
PHONO
SLEEP
CATV/ SAT
DVD
TAPE/MD
FM/AM
ANALOG/DIGITAL
TEST
100+
EFFECT
TV/ VIDEO
MUTING
REC PAUSE
1
2
3
4
5
6
7
/P
8
9
0
10
+10
CNTR
REAR•L
REAR•R
SUBWOOFER
MENU
TV CH
TV VOL
VOLUME
ENTER
8
7
3
RETURN
EN27_35.RX-6100V[C]
00.2.3, 6:38 PM
29