JVC RK-LP55, Инструкция по эксплуатации

Страница: 8 / 62

E-8
OPERATION (continued)
o
GENLOCKING MODE ADJUSTMENTS
●
Controls SC phase and horizontal phase
during genlocking
1.
Select A 3: SC FINE COARSE B using MENU
button
B
(SC phase adjustment).
2.
Set the SC COARSE using FUNC2 button
D
(0°, 90°, 180° and 270°).
3.
Fine-adjust the SC phase using FUNC1 button
C
(–128 to +127).
● If the button is held depressed, the level will
vary in 10 steps.
4.
Select A 4: H.PHASE B using MENU button
B
(horizontal phase adjustment).
5.
Adjust the horizontal phase using FUNC1
button
C
(–128 to +127).
● If the button is held depressed, the level will
vary in 10 steps.
o
GAMMA CORRECTION (ON/OFF)
●
Set to ON to correct gamma or to OFF when
gamma correction is not required.
1.
Select A 5: GAMMA B using MENU button
B
.
2.
Set to ON or OFF using FUNC2 button
D
.
o
AUTO IRIS DETECTION MODE
●
Three modes are available:
NORMAL
: Detection is based on a
combination of peak value and
average value.
PEAK : The peak value is detected, and
the optimum iris level is
adjusted.
AVG : The average value is detected,
then the optimum iris level is
adjusted.
1.
Select
A
6: IRIS DETECT
B
using MENU button
B
.
2.
Select the detection mode using FUNC2 button
D
.
● Each time is pressed, the mode changes
from NORMAL
N
PEAK
N
AVG
N
NORMAL
N
...; pressing changes the modes in
reverse order.
W.PAINT GAIN SHUTTER IRIS MANU OPERATE
FUNC1 MENU
ENTER
/SET
FUNC2
B D C E
3 : SC FINE COARSE
0 ° 0
SC FINE
SC COARSE
FUNC1 FUNC2
To fine-adjust in the +
direction.
To fine-adjust in the –
direction.
Select A SC COARSE B
4 : H. PHASE
0
Horizontal phase
FUNC1
To adjust phase in the
+ direction.
To adjust phase in the
– direction.
Set ON or OFF.
5 : GAMMA
ON
Mode indication
FUNC2
6 : IRIS DETECT
NORMAL
FUNC2
Select a detection
mode.
RM-LP55_U_E.book Page 8 Monday, July 25, 2005 2:57 PM