FM Operation
Scanning for Radio Stations
The unit will automatically select a FM radio station with a good signal.
1. Press the SOURCE button repeatedly on the main unit or DAB/FM button on the
remote control to select FM mode.
2. Press the
/SCAN button on the remote control to activate automatic programming.
All available stations are programmed in the order of wave band reception strength.
3. Press the
button to select number that you want.
4. Press the on the unit, or /SCAN button on the remote control to confirm.
Searching for a Station Automatically
In FM mode, press and hold the buttons until the tuner starts searching for a station.
The tuner will stop searching after tuning into a radio station.
The search may not stop at a station with a very weak signal.
Searching for a Station Manually
In FM mode, repeatedly press the buttons until the desired frequency reception
quality is found.
With FM radio it may be necessary to fine tune each station by pressing the
buttons on the
remote control repeatedly. Each press will adjust the frequency by 0.05MHz. If reception is still poor
adjust the position of the aerial or try moving the radio to another location.
Presetting Stations
You can store up to 20 of your favourite FM stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold the PROG button on the remote control. The display will show “##
Empty”, and the preset number will flash.
2. Press the
button on the remote control to select your desired station preset
number.
3. Press the PROG button to confirm your station, the display will show “SAVED”.
Recalling a Preset Station
1. Once you have saved a station to one of the preset buttons, you can recall it by pressing
the
button on the remote control to select your desired preset number.
2. Preset number and station name will show on the display to indicate the preset station
you are listening to. Press
/SCAN button on the unit or remote control to confirm.
The stored stations will be saved into the memory and power off will not erase it. Storing a new station in
a preset location will erase the previously stored station in that location.
21
RD-D227B_IB_Final190415V6.indd 21
16/04/2019 16:24
