17
DAB Operation
Ensure that you fully extend the aerial vertically before switching the unit on. When the unit
is connected to the mains power and then switched on from standby for the first time, or
you have just performed a factory reset the unit will automatically enter into the DAB mode
and perform auto scan function.
During the scan the display will show “Scanning ...”
together with a slide bar that indicates the progress
of the scan and the amount of stations that have been
found so far.
Once the scan has finished, the unit will select the first
alphanumerically found station.
To explore the found stations, press the VOLUME/SELECT dial and then turn the VOLUME/
SELECT dial. When you find a station that you would like to listen to, press the
VOLUME/SELECT dial.
If no stations are found after auto scan, the unit will then enter into the Tune Select Menu. Turn the
VOLUME/SELECT dial and then press the VOLUME/SELECT dial to select manual tune or full scan modes
for stations.
DAB Full Scan
The Full scan will search for the entire DAB Band III channels. After the scan has finished, the
first alphanumerically found station will be automatically selected.
Full auto scan will not replace the DAB stations in memory. If you want to remove all the previous
scanned stations, system reset is required.
1. To activate Full scan, first press and hold the MENU/INFO button, then press the
VOLUME/SELECT dial to select “Full scan”, the display will show “Scanning …” and a
progressing slide bar.
2. All the stations that have been found will be stored automatically, to explore and
listening to the found stations, press the VOLUME/SELECT dial and then turn the
VOLUME/SELECT dial. Press the VOLUME/SELECT button to confirm.
Secondary Services
You may see a “<” symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra
services that are related to the primary station. e.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station in the
station list.
To select the secondary station, press the VOLUME/SELECT button when the “<” appears
in the display before the station name. When the secondary service ends, the unit will
automatically switch back to the primary station.
JVC Wooden DAB Radio RA-D51 Manual.indd 17
11/09/2017 13:15
