10
Connecting to the Mains
DC 9V
AUX IN
This unit will automatically scan for DAB radio stations when
switched on for the first time. Before connecting the power
cable, fully extend the aerial vertically to ensure
best reception.
Before using, connect the supplied power cable to the mains cable socket at the rear of the
unit and plug in the mains socket. Switch on at the mains socket.
If no signal is received in DAB mode for approximately 15
mins, it will automatically switch to standby mode.
JVC Wooden DAB Radio RA-D51 Manual.indd 10
11/09/2017 13:15
