JVC MX-GC5 Скачать руководство пользователя

Страница: 8 / 68

Fig.6

Fig.9

Removing the CD changer unit

(See Fig.6 to 9)

Prior to performing the following procedures, remove

the top cover.

[Caution]

Although the CD mechanism unit can be

removed without removing the CD tray
panel, it is still recommended to remove it
in order to prevent damage.

a. From the front panel side of this set, push in the

sections marked with arrows and pull out the CD
tray toward the front.

b. Remove the CD tray panel by pushing both of

its extremities upward in the direction of the
arrows.

c. Push the CD tray deep into the set.

1.Disconnect the cord wires from the main PCB

CN401,CN601,CN501 and CN203.

2. From the rear of the set, remove two screws

, two

screws

and four screws

on the front panel left

and right side.

3. Handle the CD changer unit rear, take out the unit.

Fig.7

Fig.8

Antenna

terminal

CD tray panel

All manuals and user guides at all-guides.com

Содержание MX-GC5





































































Результаты поиска

Содержание MX-GC5

Отзывы:

Похожие инструкции для MX-GC5

Бренды по названию

Популярные бренды

JVC MX-GC5, Руководство по обслуживанию

Результаты поиска

Содержание MX-GC5

Отзывы:

Похожие инструкции для MX-GC5

Бренды по названию

Популярные бренды