JVC MX-GC5 Скачать руководство пользователя | Manualshive

Страница: 3 / 68

background image

Preventing static electricity

1. Grounding to prevent damage by static electricity

Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is
discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when
performing repairs.

2. About the earth processing for the destruction prevention by static electricity

In the equipment which uses optical pick-up (laser diode), optical pick-up is destroyed by the static electricity
of the work environment.
Be careful to use proper grounding in the area where repairs are being performed.

2-1 Ground the workbench

Ground the workbench by laying conductive material (such as a conductive sheet) or an iron plate over it
before placing the traverse unit (optical pickup) on it.

2-2 Ground yourself

Use an anti-static wrist strap to release any static electricity built up in your body.

3. Handling the optical pickup

1. In order to maintain quality during transport and before installation, both sides of the laser diode on the

replacement optical pickup are shorted. After replacement, return the shorted parts to their original condition.
(Refer to the text.)

2. Do not use a tester to check the condition of the laser diode in the optical pickup. The testers internal power

source can easily destroy the laser diode.

4. Handling the CD changer unit (optical pickup)

1. Do not subject the CD changer unit (optical pickup) to strong shocks, as it is a sensitive, complex unit.
2. Cut off the shorted part of the flexible cable using nippers, etc. after replacing the optical pickup. For specific

details, refer to the replacement procedure in the text.
Remove the anti-static pin when replacing the CD changer
unit. Be careful not to take too long a time when attaching it
to the connector.

3. Handle the flexible cable carefully as it may break when

subjected to strong force.

4. It is not possible to adjust the semi-fixed resistor that

adjusts the laser power. Do not turn it.

Attention when traverse unit is decomposed

*

Please refer to

“

Disassembly method

”

in the text for

pick up and how to detach the CD changer mechanism.

1. Remove the CD changer unit.
2. Disconnect the harness from connector on the CD motor

board.

3. Solder is put up before the card wire is removed from connector

Cn601on the main board as shown in Fig.

A

and Fig.

B

.

(When the wire is removed without putting up solder, the
CD pick-up assembly might destroy.)

4. Please remove solder after connecting the card wire with

CN601 when you install picking up in the substrate.

Conductive material
(conductive sheet) or iron plate

(caption)
Anti-static wrist strap

Soldering

Fig.

B

Flexible cable

Fig.

A

CD changer

unit

All manuals and user guides at all-guides.com

«
1
2
3
4
5
...
»

Содержание MX-GC5





































































Отзывы:

Нет отзывов

Похожие инструкции для MX-GC5

Бренд: Nelson Страницы: 18

Бренд: Nelson Страницы: 150

Water Jet Lightning

Бренд: Oase Страницы: 28

Бренд: Oase Страницы: 9

Бренд: X10 Страницы: 4

Бренд: ADEMCO Страницы: 56

Бренд: Conquer Страницы: 2

Бренд: Turbosound Страницы: 8

Бренд: Vingtor Stentofon Страницы: 2

Бренд: Welding Industries Malaysia Страницы: 20

Dead Level Series

Бренд: Watts Страницы: 24

Бренд: Neat Acoustics Страницы: 2

Бренд: dB Technologies Страницы: 4

Oerlikon CITOCUT 25C

Бренд: Air Liquide Страницы: 68

Бренд: Anchor Страницы: 1

Бренд: Vega Страницы: 16

Бренд: Rega Страницы: 8

Бренд: Toa Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды