JVC MX-GC5 Скачать руководство пользователя страница 12

Страница: 12 / 68

Fig.16

Fig.17

Fig.18

Motor locker

Turn table motor

Obligue gear

, and then remove the CD tray

CD pickup

Shaft

Removing the CD pickup (See Fig.16)

Prior to performing the following procedures, remove

the top cover.

Also remove the CD changer unit.

Also remove the CD changer mechanism.

1. Widen the section

2. While keeping the section

wide open, push the

section

in the direction of the arrow to remove

the shaft, and then remove the CD pickup.

Replacing the loading motor and rotor

belt of the CD changer (See Fig .17)

Prior to performing the following procedures, remove

the top cover.

Also open the CD changer tray.

1. Remove the two screws

retaining the CD changer

tray loading motor.

2. Remove the two screws

retaining the gear plate

and take it out, after remove the rotor belt from the
pulley.

Replacing the CD turn table and remov-

ing the motor (See Fig. 18 )

Prior to performing the following procedures, remove

the top cover.

Also remove the CD changer unit.

1. Remove the one screws

retaining the CD (Turn

table).

2. Remove the two screws

retaining the stopper

brackets on both sides of the CD changer unit.

3. Remove the stopper brackets from both sides of

the CD changer unit.

4. Pull out the CD tray from the CD changer unit, all

the way and lift the tray (u/~ ward) to remove.

5. Remove the gear and after push out the tray motor

locker and pull out the tray motor from the CD tray.

All manuals and user guides at all-guides.com

Содержание MX-GC5





































































Результаты поиска

Содержание MX-GC5

Отзывы:

Бренды по названию

Популярные бренды

JVC MX-GC5, Руководство по обслуживанию

Результаты поиска

Содержание MX-GC5

Отзывы:

Бренды по названию

Популярные бренды