(No.XE003)1-7
3.1.7 Removing the top case(See Figure 12 and Figure 13)
• Prior to the following procedure, the LCD panel assembly
should be removed.
(1) Remove four screws
H
and two screws
I
from the shield
plate.
H:long I:short
(2) Remove two screws
J
that are attached to the top case as-
sembly.
J : black
(3) Disconnect wires from each connector
CON3
,
CON4
, and
CON10
on the main board.
Fig.12
(4) Remove four screws
K
and one screw
L
from the bottom of
the main unit.
K : long L : short
(5) Release seven tabs
h
on the top case.
Fig.13
3.1.8 Removing the main board(See figure 14)
• Prior to the following procedure, LCD panel assembly and top
case assembly should be removed.
(1) Remove four screws
M
and one screw
N
from the main
board.
M : silver N : black
Fig.14
Tab h
H
CON3
CON4
I
I
Shield plate
J
J
H
Top case
Tab h
Tab h
CON10
K
K
L
K
K
M
M
M
N
M
Main board
