UX-M55
1-8
Fig.13
L
Fig.14
CD & MCU board
CD mechanism assembly
CD & MCU board
CD & MCU board
CN603
CN701
Tie bands
L
Fig.15
Main board
CN601
CN602
Locking board
support
CN902
Power board
CN901
Main board
Locking board supports
Power transformer
Tie bands
Power board
Lug wire
Fig.16
N
M
Bottom case
Locking board support
Radio pliers, etc.
Power board
Fig.17
Bottom case
CD rear mounting bracket
Removing the CD mechanism
assembly
(See Figs. 13 to 15.)
1.
2.
3.
4.
5.
Remove the left and right side plates.
Remove the top cabinet.
Remove the front cabinet assembly.
From the top side of the main body, disconnect the
wires from the four connectors CN601, CN602,
CN603 and CN701 on the CD & MCU board.
(See Fig.13.)
From the left side of the main body, remove the tie
bands bundling the wires. (See Fig.14.)
Disconnect the wire from the connector CN902 on
the power board. (See Fig.14.)
From the left and right sides of the main body,
remove the four screws
L
retaining the CD rear
mounting bracket. (See Figs.14 and 15.)
Slide the CD mechanism assembly toward the front
(in the direction of the arrow) and remove it from
the locking board support of the main board.
(See Fig.15.)
Removing the power board
(See Figs. 16 and 17.)
1.
2.
3.
4.
5.
Remove the left and right side plates.
Disconnect the wires from the connector CN901 on
the power board. (See Fig.16.)
Remove the tie bands bundling the wires.
(See Fig.16.)
Remove the screw
M
retaining the lug wire.
(See Fig.16.)
Remove the two screws
N
retaining the bottom
case. (See Fig.16.)
Remove the power board by pinching the two
locking board supports retaining the power board
using radio pliers, etc. (See Fig.17.)
