UX-M55
1-7
1
2
1
F
Top cabinet
(To be loosened)
Rear cabinet
F
Fig.9
Fig.8
Lift the rear
part to remove.
Fig.10
K
Fig.12
Front cabinet assembly
Hook
d
Hook
d
Bottom case
Fig.11
H
J
CD mechanism
assembly
CN607
Holder
Earphone
board
Connector on the
cassette switch
board
Connector on the
PB/REC head board
Power board
Tie band
CN608
CD mechanism
assembly
H
H
J
G
CD & MCU board
CD & MCU board
Removing the top cabinet
(See Figs. 8 and 9.)
1.
2.
From the back side of the main body, loosen the
two screws
F
retaining the top cabinet. (See Fig.8.)
Lift the rear part of the top cabinet to remove it.
(See Fig.9.)
Removing the front cabinet assembly
(See Figs. 10 to 12.)
1.
2.
3.
4.
5.
6.
7.
8.
From the left side of the main body, remove the tie
band bundling the wires. (See Fig.10.)
Disconnect the wire from the connector on the
cassette switch board. (See Fig.10.)
Remove the screw
G
retaining the holder on the
earphone board. (See Fig.10.)
Disconnect the wires from the two connectors
CN607 and CN608 on the CD & MCU board.
(See Figs.10 and 11.)
Remove the four screws
H
and the two screws
J
retaining the CD mechanism assembly from the left
and right. (See Figs.10 and 11.)
Remove the screw
K
retaining the front cabinet
assembly from the bottom side of the main body.
(See Fig.12.)
While opening the hooks
d
to the left and right of
the lower part of the front cabinet assembly (in the
direction of the arrows
1
), slide the front cabinet
assembly toward the front (in the direction of the
arrow
2
). (See Fig.12.)
Disconnect the wire from the connector on the
PB/REC head board, and then remove the front
cabinet assembly. (See Fig.10.)
Remove the left and right side plates.
Remove the left and right side plates.
Remove the top cabinet.
[Note] After assembly, apply a locking agent to
the screws G, H and J.
