JVC LYT1325-001A, Инструкция по эксплуатации

Страница: 31 / 56

MENUS FOR DETAILED ADJUSTMENT
EN
31
MasterPage: Advan_Right
ADV
A
N
C
ED
F
E
A
T
UR
ES
SQUEEZE * : For playback on TVs with an aspect ratio
of 16:9. Naturally expands the image to fit the screen
without distortion. The
indicator appears. When using
this mode, refer to your wide-screen TV’s instruction
manual. During playback/recording on 4:3 TVs/LCD
monitor/viewfinder, the image is elongated vertically.
D.WIDE * : The indicator appears. The zoom range
is extended beyond the maximum optical zoom wide
angle range. This mode’s wide angle setting is equivalent
to using a 0.7X wide conversion lens. Zooming is
possible from 0.7X to 10X. This mode is suitable for
shooting in a small room.
* Available only when the VIDEO/MEMORY Switch is set to
“VIDEO”.
[OFF] : Disengages the function.
ON : Helps cut down on noise created by wind. The
“ ” indicator appears. The quality of the sound will
change. This is normal.
墌
pg. 34, “Flash Brightness Adjustment”
SYSTEM
The “
s
SYSTEM” functions which are set when the
Power Switch is set to “ M ” are also applied when the
Power Switch is set to “PLAY”.
[ ] = Factory-preset
OFF : Even though not heard while shooting, shutter
sound is recorded on the tape.
BEEP : The beep sounds when the power is turned on or
off, and at the beginning and end of recording. It also
activates the shutter sound effect. (
墌
pg. 23, 35)
[MELODY] : Instead of a beep, a melody sounds when
any operation is performed. It also activates the shutter
sound effect. (
墌
pg. 23, 35)
OFF : The tally lamp remains off at all times.
[ON] : The tally lamp comes on to signal the start of
recording.
OFF : Disables the remote control operations.
[ON] : Enables the remote control operations.
OFF : Automatic demonstration will not take place.
[ON] : Demonstrates certain functions such as Program
AE with special effects, etc., and can be used to confirm
how these functions operate. Demonstration starts in the
following cases:
●
When the Menu Screen is closed after “DEMO MODE” is
turned “ON”.
●
With “DEMO MODE” set to “ON”, if there is no operation for
about 3 minutes after the Power Switch is set to “
A
” or “
M
”.
●
Performing any operation during the demonstration stops
the demonstration temporarily. If no operation is performed
for more than 3 minutes after that, the demonstration will
resume.
NOTES:
●
If a cassette is in the camcorder, the demonstration cannot
be turned on.
●
“DEMO MODE” remains “ON” even if the camcorder power
is turned off.
●
If “DEMO MODE” remains “ON”, some functions will not be
available. After viewing demo, set to “OFF”.
墌
pg. 26, “E-Mail Clip Recording”
[LCD] : The image is displayed on the LCD monitor when
the viewfinder is pulled out while the LCD monitor is
opened.
FINDER : The image is displayed in the viewfinder when
the viewfinder is pulled out while the LCD monitor is
opened.
EXECUTE : Resets all settings to the factory-preset.
[RETURN] : Does not reset all settings to the factory-
preset.
CAMERA DISPLAY
●
The “ n ” (CAMERA DISPLAY) settings are effective even
when the Power Switch is set to “
A
”. However, the menu
settings can be changed only when the Power Switch is set
to “
M ”.
●
The “
n
” (CAMERA DISPLAY) settings except “BRIGHT”
and “AUX MIC” are effective only for shooting.
[ ] = Factory-preset
墌
pg. 15, “Brightness Adjustment Of The Display”
LCD : Keeps the camcorder’s display (except the date,
time and time code) from appearing on the connected TV
screen.
[LCD/TV] : Makes the camcorder’s display appear on
screen when the camcorder is connected to a TV.
OFF : The date/time does not appear.
[AUTO] : Displays the date/time for approx. 5 seconds
when the Power Switch is set from “OFF” to “
A
” or “
M
”.
ON : The date/time is always displayed.
●
The date indication can also be turned on/off by pressing
the
DISPLAY Button on the remote control (provided).
(
墌
pg. 20, 40, 45)
WIND CUT
FLASH ADJ.
BEEP
TALLY
REMOTE
DEMO MODE
E-CLIP REC 160 x 120 / 240 x 176 / [352 x 288]
PRIORITY
CAM RESET
BRIGHT
ON SCREEN
DATE/TIME
GR-DZ9_DZ7US_07Advanced.fm Page 31 Wednesday, June 2, 2004 7:10 PM