JVC LYT0415-001A, Инструкция по эксплуатации

Страница: 28 / 60

28
EN
Allows you to set the current date and time (
Z
pg. 7).
Allows you to set the tape length depending on the tape used (
Z
pg. 8).
This feature allows you to set the parameters for Animation and Time-Lapse recording
(
Z
pg. 35).
This feature allows you to set the parameters for Self-Timer (
Z
pg. 34) and Time-Lapse
recording (
Z
pg. 35).
The tally lamp remains off at all times.
The tally lamp comes on to signal the start of recording.
This number is necessary when connecting the camcorder to a device such as a
computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting
is 06.
Automatic demonstration will not take place.
Demonstrates certain functions such as Fade/Wipe, etc. When
“DEMO MODE” is set to “ON” and the Menu Screen is closed,
the demonstration starts.
NOTES:
●
When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
●
By turning off the camcorder or inserting a tape whose Erase
Protection tab is in the position that allows recording into it,
“DEMO MODE” is set to “OFF” automatically.
●
During the demonstration, all functions except zoom are
disabled.
OFF
ON
RECORDING
Advanced Features (cont.)
DATE/TIME
TAPE LENGTH
REC TIME
JLIP ID NO.
DEMO MODE
INT. TIME
TALLY LAMP
OFF
ON
Menu Screen Available Using The MENU Button (cont.)
: Factory-preset