JVC LT-42B300, Руководство пользователя

Страница: 4 / 60

4
EN
I
NTRODUCTION

Supplied Accessories

Attaching the Stand
You must attach the stand to the unit to have it as a table top unit. Be sure the front and rear of the stand match the proper
direction.
Note:
• When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall,
resulting in injuries as well as damage to the unit.
• Make sure to use a table which can support the weight of this unit and is larger than this unit.
• Make sure the table is in a stable location.

Symbols Used in this Manual
The following is the description for the symbols used in this manual. Description refers to:
TV FUNCTIONS BLURAY FUNCTIONS
TV
: Analog TV operation
DTV
: Digital TV operation
BD
: Playback of BD-video
DVD
: Playback of DVD-video
CD
: Playback of audio CD
• If neither symbol appears under the function heading,
operation is applicable to both.
• If none of symbol appears under the function heading,
operation is applicable to all.
AA
AA
• If you need to replace these accessories, please refer to the model name and parts name with the illustrations and
call our toll free customer support line found on the cover of this manual.
1
Spread a thick and soft cloth over a
table as shown below.
Place the main unit face down onto it.
Make sure not to damage the screen.
At least two people are required at
this step.
2
Insert the neck under the bottom
of the main unit to the stand’s hole
(shown by arrow
➀
).
3
Drive screws in the 4 threaded holes
at the bottom of the stand until
they are tight.
To remove the stand from this unit
Unscrew the screws indicated by above “
➁
” screw holes. After
the screws are removed pull the stand up toward the rear of the
unit. Be careful not to drop the stand when you remove it.
➀
front side
➁ ➁
screw holes screw holes
remote control
(RM-C-2155) batteries (AA x 2) cable
management tie screw kit for
attaching the stand AC power cord