JVC LT-32DP9BU, Инструкция по эксплуатации

Страница: 40 / 58

ENGLISH
Etc. Advanced Basics Getting started
Problem Actions
Error message
“Missing or weak
signal”
Is the TV connected correctly to the aerial?
Change the direction of the indoor aerial.
Check digital channels signal with “Signal
Check”. (P. 34)
If you still cannot watch the digital channels
after following the steps above, there may
be a problem with your aerial or its cable. Or,
the signal may be too weak.
Consult your retailer.




Æ
“Services have
changed. Do you
want to Update PR
list?”
Update the PR List
“Update Scan” (P. 32)

Æ
“The timer will start
soon”
While watching TV, the message appears
when a timer programme is about to start,
indicating that the channel will be switched.

DTV
No picture, no sound
Some digital channels cannot be watched on
this TV. (P. 40)

When the clock is
off time
Change the “Time Zone” setting. (P. 29)

Problem Actions
Photo Viewer
Album / Title / Artist
/ Year does not
display or display
correctly (Music)
Make sure to use ID3v1 tag.

Duration time does
not display or display
correctly (Music)
Duration time cannot be calculated for MP3
that contains the artwork.
The duration time is calculated from the bit
rate and the file size, the time displayed may
differ from the actual playback time. Higher
the compression rate and lower the bit rate
/ sample rate is these error margins will be
greater.


Other
If “Auto
Demonstration”
starts when
watching TV
Set “Auto Demonstration” to “Off”. (P.34)

This is not a malfunction
When the TV is turned on, it will take approx. 18 seconds to properly
produce picture and sound.
When the TV is turned on by plugging to the AC outlet, it will take
approx. 15 seconds until the TV is ready to receive any commands
from the remote.

