English
- 13 -
Initial Settings
Press the power switch on the right side of the
TV to turn the TV on.
If the TV will not be turned on, press the standby
button on the remote control.
When the TV is first turned on, it goes into the
initial settings mode. Follow the instructions
on the screen display to make the initial set-
tings.
Note:
If the TV does not go into the initial settings mode this
is because your TV has already been turned on for the first
time. (Perform the initial settings with
INSTALLATION
(
see page 24
) in the DTV menu and
AUTOSTORE
(Ana-
logue) (
see page 29
) in the
PROGRAM
menu.)
Because this is the first time that
DTV (Digital
terrestrial broadcasting (DVB-T))
has been
used, there are no channels stored in the
memory and below information will be dis-
played on the screen.
By pressing
or
buttons highlight the
country or language and select by pressing
or buttons. Press
OK
button.
),5677,0(,167$//$7,21
3OHDVHFKRRVHFRXQWU\DQGODQJXDJH
XVLQJNH\V
3UHVVWRFRQWLQXH
(QJOLVK
2.
*HUPDQ\
After pressed OK button, the following mes-
sage appears on the screen.
35/LVW(PSW\6WDUWDXWRPDWLFVHDUFK
2.
The
DTV
will automatically tune to the trans-
missions channels This process will take
about five minutes. To cancel searching, you
can press MENU button at any time during the
process.
HINT:
Depending on the reception conditions
in your particular area, you may find that the
list of channels found includes one or more
repeated names. This is because the receiver
may detect and store some channels, includ-
ing those it cannot receive clearly, from adja-
cent areas alongside the strong channels from
a transmitter nearby. This is not a problem
and the weaker channels can be deleted from
the receiver later, as described in - Edit PR
List
section
.
0( 18
When the automatic search has finished,
the EDIT PR LIST menu appears.
If you want to, you can now edit the
programme numbers (PR) using the EDIT
PR LIST function. For details, see Edit PR
List
section
.
If you do not want to edit programme num-
bers (PR), go to the next step.
3. Press the MENU button.
The EDIT PR LIST menu disappears and the
following message appears.
'R\RXZDQWWRVHDUFKIRU
DQDORJXHFKDQQHOV"
<HV
1R
If you select Yes, Analogue terrestrial broad-
casting AUTO PROGRAM window is displayed.
When you cancel the AUTO PROGRAM, se-
lect country setting then press the BLUE but-
ton.
Country options are available as following:
D(Germany),DK (Denmark), E (Spain), F
(France), UK (United Kingdom), GR (Greece),
HUN (Hungary), I (Italy), N (Norway), NL (Neth-
erlands), P (Portugal), PL (Poland), S (Swe-
den), SL (Slovenia), SK (Slovak), TR (Turkey),
EIR (Ireland), LUX (Luxemburg), CRO
(Croatia), BL (Bulgaria), ? (Other), A (Austria),
B (Belgium), CH (Switzerland), CZE (Czech).
A01-ENG-JVC (LT-26DY8ZG)-26815W-RMC1899S MB22 PANEU IDTV-(WO PIP)-(10052179)-5011xxxx.p65
11.09.2007, 13:50
13
