JVC LT-26B60BU, Инструкция по эксплуатации

Страница: 19 / 32

ENGLISH - 18 -
In EXT mode, Install menu appears like this:
You can change only Colour system and
VCR.
Selecting Programme
• Using “ ” or “ ” button select Programme .
• To select programme number, you can use
“ ” / “ ” button or Digit Buttons.
Selecting Band
Band
, can be chosen either,
• “C” or “S” by “ ” or “ ” button.
Selecting Channel
Channel can be changed by “ ” or “ ” button
or by Digit Buttons.
Selecting Colour System
Using “ ” or “ ” button on Colour System ,
you can change the colour system to PAL,
SECAM or Auto .
Note: In EXT mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Selecting Sound System
Using “ ” or “ ” button on Sound System ,
you can change the standard to BG, DK, I, L,
Lp .
Selecting Fine Tuning
You can use the Fine Tuning process for fine
adjustment (after coarse adjustment), if you
are not happy about the image on the screen.
Use “ ” or “ ” button on
Fine Tuning item,
until getting the best image on the screen.
Selecting Search
To start the search process, press “ ” button
for forward search or “ ” button for backward
search. If a signal is found or reaches to end
of the band after searching, press “ ” or “ ”
buttons to continue search process. To stop
the search process when you want, press “ ”
or “ ” buttons at any time.
Decoder(EXT-2)
You can use this mode to connect any de-
coder to your TV.
• Press the “ ” or “ ” buttons to set it “
On ” or
“ Off ”.
When you select Decoder(EXT-2) “ On ”,
EXT-2 output will be chosen as TV mode only
and any scrambled channels will be un-
scrambled through decoder connected your
TV via EXT-2 output.
Setting VCR (Video Cassette Recorder )
Mode
• This item can be seen in TV, EXT-1 , EXT-2,
EXT-3 and EXT-4 modes.
• If you want to watch a VCR source from one of
these modes, then it will be better to set VCR
mode “on”. For this, while the cursor is on
this item press the “ ” or “ ” buttons to set
it “ On ”.
• If you want to watch a DVD , then you must set
this item “off”; because DVD is not a source
like a VCR and to see the picture better, you
must set the VCR mode “ Off ”.
To Store Settings
• Press “ ” / “ ” or “ OK ” button on Store op-
tion to store Install menu settings.
• After stored, T-V Link menu will appear. If you
do not need to do T-V Link, select Cancel
and press “ ” or “ OK ” button to exit the menu.
Program Menu
Press “ MENU ” button, now you are in main
menu. In the main menu, select “ Program ”
using “ ” or “ ” button. Then enter the
Programme menu by pressing “ ” / “ ” or
“ OK ” button.
Note: There is no Program menu in any EXT
modes.