9
Auto setup
Your television has an Automatic Tuning
System which makes tuning in your television
easy. This Automatic tuning System scans
the entire reception range in your area and
automatically stores all available analogue
channels of suitable signal strength
in the correct order.
Preparation:
Press
(Power) on the unit or on the remote.
1
Auto Installation menu will appear.
Press or to select desired language.
Then press
ENTER
.
Auto Installation
- Step 1 -
Language
English
ภาษาไทย
Français
2
If you cancel Auto Power Off (see page 14),
press or to select Off. Then press
ENTER
.
Auto Installation
- Step 2 -
Auto Power Off
Your TV has been set to
power off after 4 hours of
continuous viewing. If you
want to change this setting,
please choose Off. This
setting can also be change
in the MENU
Off
4 Hr
2 Hr
1 Hr
3
TV will search for TV-channels. Connect your
antenna now.
Continue with
ENTER
to start auto tuning.
The tuning’s progress will be displayed in
percent for confirmation.
Auto Installation
- Step 3 -
Start Auto Tune
Note:
Please be patient - the Auto Tuning process
can take several minutes to complete.
•
4
When the display reads 100%, normal TV-screen will
appear.
Note:
To cancel the auto tuning, press
RETURN
during the
process.
THE AUTOMATIC TUNING PROCESS WILL
ONLY START BY ITSELF THE FIRST TIME YOU
SWITCH THE SET ON. HOWEVER YOU CAN
RESTART THIS PROCESS VIA THE MENU
SYSTEM (see page 10).
If you could not set up a correct language in this auto
setup process, you will be able to make your preferred
language selection as illustrated in page 10 (On-screen
Language Selection).
•
•
Quick guide for Menu operation
Call Menu and for example: Select “Auto
Search”.
1
Press
INPUT SELECT
. Select TV, then press
ENTER
. Press
MENU
.
2
Press or to select “Channel” then press .
Current Channel
Color System
Sound System
Auto Search
Manual Search
Fine Tune
Channel Management
Picture
Sound
PC Setup
Feature
Channel
1
Auto
BG
45.25 MHz
Channel
3
Press
or to select “Auto Search”, then press .
Channel
1
Auto
BG
45.25 MHz
Current Channel
Color System
Sound System
Auto Search
Manual Search
Fine Tune
Channel Management
Picture
Sound
PC Setup
Feature
Channel
... on the following pages the MENU can be called in
the same way as here.
4
Press
MENU
to exit the menu.
Note:
The Menu screen disappears automatically after a
defined period of time with “OSD Timer”. (see page 14)
•
Selecting the input source
Press
INPUT SELECT
to view a signal from
another device connected to your TV, such as a
VCR or DVD player. You can select each input
source depending on which input jacks you used to
connect your devices.
To select the video input source, press / , then
press
ENTER
.
Each time
INPUT SELECT
is pressed, the input
source toggles.
Input
TV
AV1
AV2
HDMI
PC
DVD
56S1101A_EN.indd 9
56S1101A_EN.indd 9
12/23/10 9:26:24 AM
12/23/10 9:26:24 AM
