8
2
4
3
6
5
7
1
Controls and Features
7
Front panel
1
Speaker (Monaural) (LM-170A only)
Outputs the audio signal of the selected input.
NOTE:
• For audio signals input to the DVI-D or RGB terminal,
left and right audio channel are mixed and output as
monaural audio.
2
CHROMA/PHASE button*
1
Activates the Chroma (picture color density)
adjustment mode or the Phase (picture hue)
adjustment mode.
• Press the button to select the mode, then adjust
the value (–25 - 00 - +25) by pushing the menu
control button (
4
) left or right.
NOTE:
• Chroma is adjustable when the NTSC or PAL signal is
input.
• Phase is adjustable when the NTSC signal is input.
3
CONTRAST/BRIGHT button*
1
Activates the picture contrast adjustment mode or
picture brightness adjustment mode.
• Press the button to select the mode, then adjust
the value (–25 - 00 - +25) by pushing the menu
control button (
4
) left or right.
4
Menu control button
Operates the menu by pushing or pressing the
button to the indicated direction.
+
pages 13 and 14
Pushing the button up or down:
Selects a menu item.
Pushing the button left or right:
Adjusts the selected menu item.
Pressing the center of the button:
• Goes to the next step.
• Performs the selected function.
5
Volume control button (LM-170A only)*
2
While the menu is not displayed,
adjust the volume level (00 to 50) by
pushing the button left or right.
6
MENU button
Displays the MAIN MENU.
+
page 13
To display the SET-UP MENU:
Press the CHROMA/PHASE button (
2
) while
pressing the MENU button. (
+
page 14)
7
SCAN SIZE button/lamp
Selects the screen size.
OVER
=
100%
=
USER
=
(back to the beginning)
NOTE:
• Memorized for each input.
• For LM-170A: when “100%” is selected, black bars
appear on the top and the bottom of the screen because
the aspect ratio of the LCD panel is 5:4.
• When “USER” is selected, horizontal/vertical size and
position can be manually adjusted. (
+
“SIZE/POSI. ADJ.
(USER)” on page 15)
• When “100%” or “USER” is selected, the lamp lights up.
• This function is not available for the computer signals.
*
1
During picture adjustment:
• The adjustment bar will disappear in about 10
seconds after the last operation.
• Pressing MENU will also make the adjustment bar
disappeared.
• “NO EFFECT” is displayed when the operation
you have tried is not available for the current input
or setting.
• The position of the adjustment bar can be
changed. (
+
“ADJ. BAR POSI.” on page 13)
*
2
During volume adjustment (LM-170A only):
• The adjustment bar will disappear in about 5
seconds after the last operation.
• Pressing MENU will also make the adjustment bar
disappeared.
• The position of the adjustment bar can be
changed. (
+
“ADJ. BAR POSI.” on page 13)
The illustration of the monitor is of LM-170A.
LM170A&150A-EN.indb 8
LM170A&150A-EN.indb 8
07.11.2 3:21:22 PM
07.11.2 3:21:22 PM
