20
Specifications
Model
LM-170A
LM-150A
Type
LCD Display Monitor
LCD panel
17”, active matrix TFT
15”, active matrix TFT
Effective Screen Size
Width:
337.9 mm (13 1/4”)
Height:
270.3 mm (10 5/8”)
Width:
304.1 mm (11 15/16”)
Height:
228.1 mm (8 15/16”)
Number of Pixels Displayed
1280 x 1024
1024 x 768
PC Scanning Frequency
H:
31.5 kHz – 80 kHz
V:
56 Hz – 75 Hz
H:
31.5 kHz – 60 kHz
V:
56 Hz – 75 Hz
* Some signals within this frequency range may not be displayed depending on the
computer you use (“Out of range” appears).
Input/Output
Terminals
Video
VIDEO 1
Composite video:
1 line, BNC connector x 2, 1 V(p-p), 75
Ω
* The input (IN) and output (OUT) terminals are bridge-connected.
(Auto termination)
VIDEO 2
DVI-D
DVI-D: DVI-D connector x 1 (compatible with DDC2B)
RGB
Analog RGB: D-Sub 15-pin x 1
Video signal: G:
1 V(p-p), 75
Ω
(including sync)
R, B: 0.7 V(p-p), 75
Ω
Horizontal sync (HD)/Composite sync (Cs):
1 V(p-p) – 5 V(p-p) (positive/negative polarity)
Vertical sync (VD): 1 V(p-p) – 5 V(p-p) (positive/negative polarity)
* Computer signals are compatible with DDC2B.
A
udio
AUDIO 1
Analog audio:
1 line, RCA connector x 1,
500 mV (rms), high impedance
AUDIO 2
AUDIO (DVI-D)
Analog audio:
1 line, Stereo mini jack (
φ
3.5 mm) x 1,
500 mV (rms), high impedance
AUDIO (RGB)
Compliant Video Signal
Format
Video signal:
Composite video: NTSC, PAL, B/W (50 Hz/60 Hz)
Computer signal:
DVI-D:
+
“Available computer signals” on page 22
Analog RGB:
+
“Available computer signals” on page 22
Audio Output
Internal: 1 W (monaural)
Environmental Conditions
Operating temperature:
5°C – 35°C (41°F – 95°F)
Operating humidity:
20% – 85% (non-condensing)
Power Requirements
AC 100 - 240 V, 50 Hz/60 Hz
Rated Input Current
0.9 A
0.9 A
Dimensions
Width: 374 mm (14 3/4”)
374 mm (14 3/4”)
Height: 373.6 mm (14 3/4”) 334 mm (13 1/4”)
Depth: 184 mm (7 1/4”)
70.5 mm (2 7/8”)
(with the stand)
(without the stand)
Width: 342 mm (13 1/2”) 342 mm (13 1/2”)
Height: 330.6 mm (13 1/8”) 291 mm (11 1/2”)
Depth: 184 mm (7 1/4”)
70.5 mm (2 7/8”)
(with the stand)
(without the stand)
Weight
7.2 k
g
(15.8 lbs) (including the stand)
4.6 k
g
(10.1 lbs) (excluding the stand)
6.2 k
g
(13.6 lbs) (including the stand)
3.6 k
g
(7.9 lbs) (excluding the stand)
Accessory
AC power cord
* Illustrations and pictures used in this manual have been exaggerated, abbreviated or compounded for explanatory purposes
only. The appearance of the actual product may differ slightly.
* Dimensions and weight are approximate.
* Design and specifications are subject to change without notice.
* All company names and product names mentioned herein are used for identification purposes only, and may be the trademarks
or registered trademarks of their respective companies.
LM170A&150A-EN.indb 20
LM170A&150A-EN.indb 20
07.11.2 3:21:29 PM
07.11.2 3:21:29 PM
