JVC KY-PZ200BE, Инструкция по эксплуатации

Страница: 18 / 52

Infrared Remote Control
.
FAST
P/T RST L/R SET
AUTO FAR NEAR MANUAL
BACKLIGHT
FOCUS
SLOW ZOOM
RESET
MENU
PRESET
CAMERA SELECT
STD
1
F1 F2 F3 F4
1 2 3 4
2 3
4 5 6
7 8 9
0
REV
HOME
Q
O
M
A
B
F
H
L
N
D
E
K
P
J
C
G
I
A
STANDBY button
Switches between the standby and normal
modes.
Memo :
0
Power consumption in the standby mode is
approximately half of that in the normal mode.
B
NUMBER button
For preset configuration or invoking a preset
number.
C
Z
button
To be used together with other buttons.
D
PRESET button
Stores the preset position.
[PRESET] + NUMBER button (1 to 9):
Stores the preset position in the selected
NUMBER button.
Memo :
0
Press the buttons above in sequence.
E
HOME button
Restores the orientation of the camera to face
the front.
Functions as a confirmation button when the
menu is displayed.
F
RETURN button
Functions as a cancel button when the menu is
displayed.
G
ZOOM button
SLOW ZOOM:
Zooms in [+] or zooms out [-] the camera at a
low speed.
FAST ZOOM:
Zooms in [+] or zooms out [-] the camera at a
high speed.
H
L/R SET button
Press the button together with the NUMBER
button [1] or [2] at the same time to pans the
camera toward the left or right.
0
Pressing the left or right side of the [L / R
SET] + [1] (STD) at the same time pans the
camera toward the left or right accordingly.
0
Pressing the left or right side of the [L / R
SET] + [2] (REV) at the same time pans the
camera toward the right or left accordingly.
This setting comes in handy in cases such as
when the camera is suspended from the
ceiling.
I
FOCUS button
For adjusting the focus.
0
[AUTO]:
Auto Focus mode (AF)
0
[MANUAL]:
Manual Focus mode (MF)
0
During MF, focus is adjusted using [FAR]
(for setting focus on a distant subject) and
[NEAR] (for setting focus on a nearby
subject).
J
P/T RST button
Resets the pan and tilt positions.
K
BACKLIGHT button
Press the button to enable backlight
compensation. Pressing the button again
disables backlight compensation.
Memo :
0
This feature is available only when [Exposure] is
configured to “Auto”.
0
Use this feature when there is a light source
behind the subject that causes the subject to
appear dark in the image.
L
MENU button
Displays the menu or exits the menu display.
M
PAN/TILT CONTROL button
Press the arrow button to pan or tilt the camera.
Pressing the [HOME] button restores the
orientation of the camera to face the front.
Moves the cursor when the menu is displayed.
N
RESET button
Erases the preconfigured settings.
[RESET] + NUMBER button (0 to 9):
Erases the preset position in the selected
NUMBER button.
[
Z
] + [#] + [RESET]:
Erases all the preset positions.
Memo :
0
Press the buttons above in sequence.
18
Names of Parts
Getting Started