background image

.

When the equipment is installed in a 
cabinet or on a shelf, make sure that it 
has sufficient space on all sides to allow 
for ventilation (10 cm (3-15/16

"

) or more 

on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a 
newspaper, or cloth etc. the heat may not 
be able to get out.)
No naked flame sources, such as lighted 
candles, should be placed on the 
apparatus.
When discarding batteries, 
environmental problems must be 
considered and the local rules or laws 
governing the disposal of these batteries 
must be followed strictly.

.

The apparatus shall not be exposed to 
dripping or splashing and that no objects 
filled with liquids, such as vases, shall be 
placed on the apparatus.

.

Do not point the lens directly into the sun. 
This can cause eye injuries, as well as 
lead to the malfunctioning of internal 
circuitry. There is also a risk of fire or 
electric shock. 

CAUTION!

Connecting cables (Audio/Video, etc.) to 
this unit and leaving it on top of the TV is 
not recommended, as tripping on the 
cables will cause the unit to fall, resulting 
in damage. 

.

Si le matériel est installé dans un coffret 
ou sur une étagère, s’assurer qu’il y a un 
espace suffisant sur tous les côtés pour 
permettre la ventilation (10 cm (3-15/16") 
ou plus sur les deux côtés, au dessus et 
à l’arrière).
Ne pas boucher les orifices de 
ventilation.
(Si les orifices de ventilation sont 
bouchés par un journal, un tissu, etc., la 
chaleur peut ne pas s’éliminer.)
Aucune source à flamme nue, telle que 
des bougies allumées, ne doit être 
placée sur l’appareil.
En jetant des batteries aux ordures, les 
problèmes d’environnement doivent être 
pris en considération et les 
réglementations locales ou la législation 
concernant le rebut de ces batteries 
doivent être strictement respectées.

.

L’appareil ne doit pas être exposé à de 
l’eau ou à des éclaboussures et les 
objets remplis de liquide, tels que des 
vases, ne doivent pas être placés sur 
l’appareil.

.

Ne dirigez pas l’objectif directement vers 
le soleil. Vous pourriez vous abîmer la 
vue et l’appareil pourrait être 
endommagé. Il y a aussi risque 
d’incendie ou d’électrocution.

Attention!

Avec des câbles (Audio/Vidéo, etc.) 
raccordés, il est recommandé de ne pas 
laisser le caméscope sur le dessus du 
téléviseur, car tirer sur les câbles pourrait 
faire tomber le caméscope, causant des 
dommages.

Safety Precautions

7

Getting Started

Содержание KY-PZ200BE





















































Отзывы: