21
6. SETTING ON THE MENU SCREEN (Cont’d)
WHITE BALANCE SCREEN (Cont’d)
FREEZE SCREEN
Item
SHADING
MODE
OFF
MANUAL
LEVEL(R )
+127
to
NORMAL
to
–128
+127
to
NORMAL
to
–128
+127
to
NORMAL
to
–128
LEVEL(G )
LEVEL(B)
Functions and operation
Variable values
It sets whether the WHITE SHADING mode is ON or OFF.
OFF : WHITE SHADING mode is off.
MANUAL : WHITE SHADING adjustment can be carried out.
Adjust it with LEVEL<R>, LEVEL<G> and LEVEL<B>.
Refer to the "WHITE SHADING ADJUSTMENT" on page 14.
The red color of the white shading can be adjusted only when the SHADING MODE
is set to the MANUAL.
Higher number : Red color at the bottom of the screen is suppressed and that at
the top of the screen becomes stronger.
Lower number : Red color at the bottom of the screen becomes stronger and that
at the top of the screen is suppressed.
The green color of the white shading can be adjusted only when the SHADING MODE
is set to the MANUAL.
Higher number : Green color at the bottom of the screen is suppressed and that at
the top of the screen becomes stronger.
Lower number : Green color at the bottom of the screen becomes stronger and
that at the top of the screen is suppressed.
The blue color of the white shading can be adjusted only when the SHADING MODE
is set to the MANUAL.
Higher number : Blue color at the bottom of the screen is suppressed and that at
the top of the screen becomes stronger.
Lower number : Blue color at the bottom of the screen becomes stronger and that
at the top of the screen is suppressed.
Item
FREEZE
NORMAL
RANDOM TRG
FLASH
SLOW SHUT
Functions and operation
Variable values
NORMAL
RANDOM
TRG
FLASH
SLOW SHUT
:
:
:
:
KY-F58 stores the video signal into its memory and outputs the FREEZE signal
(freeze picture) from each OUTPUT connector on the rear panel.
It sets the timing of freeze or whether it is operated together with a flash light or not.
The image is stored in the KY-F58’s memory when the FREEZE
button is pressed or when the signal is input from the FREEZE
connector on the rear panel.
No signal is output from the FLASH terminal at this time.
This is set with the external trigger timing when recording an object in
quick motion.
The shutter speed is set at the “RANDOM SHUT”.
Refer to the “Random Trigger Function” on page 28.
When the FREEZE button is pressed or when a signal is input from
the FREEZE terminal on the rear panel, a flash signal is output from
the FLASH connector and the image is stored in the memory of the
KY-F58. At this time, the item for the HI-RESO is fixed to ON.
Because the image is stopped at each frame, the image influenced by
the flash is fully scanned vertically. This function cannot be used
together with an electronic shutter.
Refer to the “FLASH Function” on page 28.
It is set when recording an object in a dark place.
The freeze interval is set at the “SLOW SHUT”.
Refer to the “Slow Shutter Function” on page 27.
Note:
If the “FREEZE” item is set to “RANDOM TRG” when the power is
turned on, approximately 5 seconds is required until the FREEZE
signal is input. In this time, the camera video signal will not be
output to each OUTPUT connector.
Note:
• The FREEZE input will not be received for approximately 5 seconds after the
power is turn on.
• Approximately 4 seconds is required until switching the mode.
