JVC KY-F560, Инструкция по эксплуатации

Страница: 18 / 48

E-18
Display the built-in colour bars signal at the camera on the monitor to perform colour/contrast/brightness
adjustment.
3. Setting and Adjustment During Shooting
External Monitor Adjustment
1.
Connect the colour video monitor to the [VIDEO OUT] of this
unit.
2.
Press the [BARS] button to output the colour bars signal (EBU-
compliant colour bars).
3.
With the colour bars displayed, turn [BLUE CHECK] at the moni-
tor to ON.
Screen turns into a monochrome of blue and colour bars ap-
pear as blue stripes.
4.
Turn the [CHROMA] adjustment knob on the monitor and ad-
just colour bars
1
and
7
to the same brightness level.
5.
With [BLUE CHECK] in the ON mode, turn the [PHASE] ad-
justment knob on the monitor to adjust colour bars
3
and
5
to
the same brightness level.
6.
If brightness of colour bars
1
and
7
vary upon [PHASE] ad-
justment, repeat chroma adjustment as in step 4. .
7.
Turn [BLUE CHECK] at the monitor to OFF and return to the
normal screen (R, G and B are all displayed).
2.
[BARS] button
MENU
AW BARS
SET
LENS
REMOTE
GENLOCK IN
VIDEO OUT
POWER
DC IN
SEE INSTRUCTION MANUAL
1.
3.~7.
1 2 3 4 5 6 7 8
Red White Yellow Cyan Green Magenta Blue Black