JVC KW-M540BT, Инструкция по эксплуатации

Страница: 41 / 56

39 ENGLISH
Settings Settings
Remote Controller Remote Controller
Remote controller RM-RK258 is supplied
for
KW-V640BT Region 3/KW-V640BTM
Region 2/KW-M540BT Southeast Asian
models/KW-M540BTM.
• For KW-M540BT Australian/New Zealand models :
To use the remote controller, purchase optional
remote controller, RM-RK258.
Refer to the instruction manual supplied with the
remote controller.
• The unit is equipped with a steering wheel remote
control function. (Page 36)
– See page 44 for connection.
– Operations may differ depending on the type of
steering wheel remote control.
RM-RK258
Preparation
Removing the battery sheet
Pull the battery sheet out from the remote controller
to activate the battery.
Changing the battery of the remote
controller
CR2025 (+side)
• Use a commercially available button battery
(CR2025).
• Insert the battery with the + and – poles aligned
properly.
– If the effectiveness of the remote controller
decreases, replace the battery.
Navigation settings
(Only for KW-V640BT Region 3 except for
Indonesian models/KW-V640BTM Region 2/
KW-M540BT Southeast Asian models/
KW-M540BTM)
Display the <Navigation> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Navigation] .
<NAV Voice Volume>
Adjust the volume of the navigation guidance. ( 0 to
40 , Initial: 24 )
EN̲KW-V2018TC̲M.indb 39 EN̲KW-V2018TC̲M.indb 39 2018/01/16 15:06 2018/01/16 15:06