JVC KS-LX200R, Руководство по обслуживанию

Страница: 75 / 99

19
ENGLISH
Using the Sound Control
Memory
You can select and store a preset sound adjustment
suitable for each playback source
(Advanced SCM.)
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3, AM, tape and
external components.
• If you do not want to store the sound mode
separately for each playback source, but want to
use the same sound mode for all the sources,
see “To cancel Advanced SCM LINK – SCM LINK”
on page 23.
1
Press MODE ATT.
The number buttons can work as
different function buttons.
2
Select the sound mode you want.
Each time you press the button, the
sound mode changes as follows:
• If “SCM LINK” is set to “LINK ON” (see page 23),
the selected sound mode can be stored in
memory for the current source, and the effect
applies to the current source.
• If “SCM LINK” is set to “LINK OFF,” the selected
sound mode effect applies to any source.
CONTINUED ON THE NEXT PAGE
What is BBE
II
?
The BBE
II
* function restores the brilliance and clarity
of the original live sound in recording, broadcasts,
etc.
When a speaker reproduces sound, it introduces
frequency-dependent phase shifting, causing high-
frequency sounds to take longer to reach the ear
than low frequency sounds. The BBE
II function
adjusts the phase relationship between the low, mid
and high frequencies by adding a progressively
longer delay time to the low and mid frequencies,
so that all frequencies reach the listener’s ears at
the proper time.
In addition, the BBE
II function boosts low and high
frequencies, which loudspeakers tend to be less
efficient in reproducing, through dynamic, program-
driven augmentation. When combined with the
phase compensation feature, the resulting sound
has a clearer, more finely detailed “live” presence.
Each time you press + or – in step 2 on the previous
page, the BBE
II
function changes as follows:
As the number gets higher, the BBE II function
becomes stronger.
When shipped from the factory, the BBE
II function
is set to “2.”
To cancel the BBE
II
function, select “OFF.”
* Under license from BBE Sound, Inc.
R
is a trademark of BBE Sound, Inc.
BEAT SOFT POP SCM OFF
(1) (2)
Canceled
(OFF)
(3)
(Canceled)
BBE OFF
BBE 1 BBE 2 BBE 3
EN18-20.KS-LX200R[E]f 8/30/00, 10:08 AM 19