KS-F315
1-6
Fig. 14
8
8
8
8
Chassis assembly
Removing the Head Amplifier Board
( See Fig. 12 )
1. Removing the front chassis.
2. Removing the bottom cover.
3. Removing the heat sink.
4. Removing the main board assembly.
5. Removing the cassette mechanism.
6. Remove the screw ( 6 ) retaining the head ampli-
fier board.
7. Shift the two inter rocking sections ( j ) securing
the head amplifier board in the direction shown by
the arrow "B" to remove the printed circuit board.
8. From the connector CJ901 on the head amplifier
board from connector wire out going to the head
relay board.
Removing the Chassis Assembly
( See Fig. 13 and 14 )
1. Removing the front chassis.
2. Removing the bottom cover.
3. Removing the heat sink.
4. Removing the main board assembly.
5. Removing the cassette mechanism.
6. Removing the head amplifier board.
7. Turn the left side to cassette mechanism.
8. Remove the screw ( 7 ) retaining the relay board.
9. Shift the one inter rocking sections ( k ) securing
the relay board in the direction shown by the
arrow "C" to remove the printed circuit board.
10. Turn the back side down, remove the four screws
( 8 ) retaining the chassis assembly.
Fig. 12
To head relay board
Head amplifier board
CJ901
6
j
j
B
Fig. 13
Relay board
C
7
k
Содержание KS-F315
Страница 21: ...KS F315 1 21 ANP1 ANP2 UPC1228HA 1 2 3 4 5 6 7 8 IN1 NFB1 OUT1 VCC GND OUT2 NFB2 IN2 UPC1228HA IC901 Head amp ...
Страница 28: ...KS F315 3 5 Grease point 1 2 Grease Reverse side FL 942 SW 902 SW522B FG 84M C68 1 A 2 72 24 ...
Страница 29: ...KS F315 3 6 Grease point 2 2 12 35 5 30 20 19 15 16 39 38 42 43 4 37 3 ...
Страница 38: ... M E M O KS F315 2 2 ...