KS-F315
1-4
Removing the Heat Sink ( See Fig. 5 )
1. Removing the front chassis.
2. Removing the bottom cover.
3. Remove the three screws ( 1 ) retaining the
heat sink.
Removing the Main Board Assembly
( See Fig. 5 to 7)
1. Removing the front chassis.
2. Removing the bottom cover.
3. Removing the heat sink.
Attach the heat sink with a screw ( 1` ) on operat-
ing checks.
4. Remove the two screws ( 2 ) retaining the main
board assembly.
5. Remove the two screws ( 3 ) retaining the rear
panel .
6. Separate the main board assembly and cassette
mechanism assembly.
7. Take out the main board assembly.
Heat sink
Fig. 5
1
1
1
Main board assembly
Fig. 6
2
2
(
)
Rear panel
Fig. 7
3
3
Содержание KS-F315
Страница 21: ...KS F315 1 21 ANP1 ANP2 UPC1228HA 1 2 3 4 5 6 7 8 IN1 NFB1 OUT1 VCC GND OUT2 NFB2 IN2 UPC1228HA IC901 Head amp ...
Страница 28: ...KS F315 3 5 Grease point 1 2 Grease Reverse side FL 942 SW 902 SW522B FG 84M C68 1 A 2 72 24 ...
Страница 29: ...KS F315 3 6 Grease point 2 2 12 35 5 30 20 19 15 16 39 38 42 43 4 37 3 ...
Страница 38: ... M E M O KS F315 2 2 ...