background image

2

Note

KS-AR8002D

2-speaker system

KS-AR8004D

*

1

  RCA pin cords (not included with this unit)

*

2

  Bridge Mode: Be sure to connect the line output from the receiver to the left (L/MONO) jack on this unit.

Connection varies depending on the number of the speakers used in your car. Select the 
appropriate connection referring to the following diagrams.

Before connecting:

• Securely connect all the parts. If the connections are loose, due to contact resistance etc., heat 

will break out and may cause an accident. Secure and cover the cords with insulating tape and 
run them under the car mats.

Connect the Line Output from the receiver to the INPUT jacks on this unit using RCA pin 
cords (not included with this unit).

• Be sure to adjust the CROSSOVER fi lter switch as illustrated on the following diagrams. (See 

also “CONTROLS” on page 3.)

Do not adjust the CROSSOVER fi lter switch while the unit is turned on.

SPEAKER CONNECTIONS

Make sure to comply with the following notes:

• Be sure not to connect the “

·

” terminals of the speakers to a common point.

• If the same lead is used for both left/right or front/rear speaker wirings, this unit cannot be used. 

Always use independent leads for each speaker. In this case, redo the wiring.

• Use speakers with an impedance of 2 

 to 8 

 (4 

 to 8 

: when used in Bridge Mode).

• Use speakers which have suffi cient capacity for the unit.

SPEAKER SYSTEMS

For 

KS-AR8004D

:

When you connect 4 speakers to the unit, down mixed signals (front and rear) are emitted 
through the PRE OUT jacks.
For 

KS-AR8002D

:

Incoming signals are emitted through the PRE OUT jacks.

4-speaker system

Control panel

Front Speaker

(left/right)

Rear Speaker

(left/right)

Line Out (Rear)

Line Out 

(Front)

CROSSOVER 

fi lter switch

2-speaker system plus subwoofer—Bridge Mode*

2

Subwoofer

Control panel

Line Out (Rear) or Subwoofer Out

Line Out

(Front)

Front Speaker

(left/right)

CROSSOVER fi lter switch

2-speaker system—Bridge Mode*

Control panel

Line Out

Front Speaker

(left/right)

CROSSOVER 

fi lter switch

2-speaker system (2 amplifi ers)—Bridge Mode*

2

Control panel

Control panel

Line Out

Right speaker

Left speaker

CROSSOVER 
fi lter switch

Subwoofer system (5.1channel receiver)—Bridge Mode*

2

Subwoofer

Control panel

Subwoofer Out

CROSSOVER 

fi lter switch

Control panel

Right speaker

Left speaker

Line Out

CROSSOVER 

fi lter switch

2-speaker system plus subwoofer (PRE OUT)

JVC power amplifi er:

KS-AR8001D

Control panel

Right speaker

Left speaker

Line Out

Subwoofer 
System

CROSSOVER 

fi lter switch

4-speaker system plus subwoofer (PRE OUT)

  Down mixed signals are emitted through the PRE OUT jacks.

JVC power amplifi er:

KS-AR8001D

Control panel

Front Speaker

(left/right)

Rear Speaker

(left/right)

Line Out (Rear)

Line Out (Front)

Subwoofer 
System

CROSSOVER 

fi lter switch

JVC car receiver, etc.

JVC car receiver, etc.

JVC car receiver, etc.

JVC car receiver, etc.

JVC car receiver, etc.

JVC car receiver, etc.

JVC car receiver, etc.

JVC car receiver, etc.

EN_KS-AR8004D_8002D[EU]f.indd   2

EN_KS-AR8004D_8002D[EU]f.indd   2

07.12.17   0:57:16 PM

07.12.17   0:57:16 PM

Содержание KS-AR8002D







Отзывы: