22
ENGLISH
[FADER]
(Not applicable when 3-way crossover is selected.)
[POSITION R15]
to
[POSITION F15]
(
[POSITION 00]
): Adjusts the front
and rear speaker output balance.
[BALANCE]
*3
[POSITION L15]
to
[POSITION R15]
(
[POSITION 00]
): Adjusts the left and
right speaker output balance.
[VOLUME ADJUST] [LEVEL –15]
to
[LEVEL +06]
(
[LEVEL 00]
): Presets the initial volume level
of each source by comparing to the FM volume level. (Before adjustment,
select the source you want to adjust.)
[AMP GAIN]
[LOW POWER]
: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ;
[HIGH POWER]
: The maximum volume level is 35.
[SPK/PRE OUT]
(Not applicable when 3-way crossover is selected.)
Depending on the speaker connection method, select the appropriate
setting for the desired output. (See “Speaker output settings” on
page 23.)
[SPEAKER SIZE]
Depending on the crossover type you have selected (see
[X ' OVER TYPE]
),
2-way crossover or 3-way crossover setting items will be shown. (See
“Crossover settings” on page 23.)
By default, 2-way crossover type is selected.
[X ' OVER]
[DTA SETTINGS]
For settings, see “Digital Time Alignment settings” on page 26.
[CAR SETTINGS]
[X ' OVER TYPE]
Caution
: Adjusts the volume before changing the
[X ' OVER TYPE]
to avoid
the sudden increase or decrease of the output level.
[2-WAY]
(Displayed only when
[3-WAY]
is selected.)
[YES]
: Selects two way crossover type. ;
[NO]
: Cancels.
[3-WAY]
(Displayed only when
[2-WAY]
is selected.)
[YES]
: Selects three way crossover type. ;
[NO]
: Cancels.
AUDIO SETTINGS
[SOUND EFFECT]
[SPACE ENHANCE]
(Not applicable for FM/AM/SW1/SW2 source.)
[SMALL]
/
[MEDIUM]
/
[LARGE]
: Virtually enhances the sound space. ;
[OFF]
: Cancels.
[SND RESPONSE]
[LEVEL1]
/
[LEVEL2]
/
[LEVEL3]
: Virtually makes the sound more realistic. ;
[OFF]
: Cancels.
[SOUND LIFT]
[LOW]
/
[MIDDLE]
/
[HIGH]
: Virtually adjusts the sound position heard from
the speakers. ;
[OFF]
: Cancels.
[VOL LINK EQ]
[ON]
: Boosts the frequency to reduce the noise heard from outside the car
or running noise of the tyres. ;
[OFF]
: Cancels.
[K2 TECHNOLOGY]
(Not applicable for FM/AM/SW1/SW2 source and AUX source.)
[ON]
: Improves the sound quality of compressed music. ;
[OFF]
: Cancels.
*1 Displayed only when
[SUBWOOFER SET]
is set to
[ON]
. (Page 21)
*2 For 2-way crossover: Displayed only when
[SPK/PRE OUT]
is set to
[SUB.W/SUB.W]
.
(Page 23)
*3 This adjustment will not affect the subwoofer output.
